User manual SIEMENS GIGASET C460 IP

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] If you add a star (*) at the end of the number, then the number will always be dialled via the non-standard connection (page 26). ~ Enter the name and press §OK§. Storing a number in the directory Assigning a key §Menu§ ¢ Shortcut Assign the current entry for quick dial to Q or one of the keys from 2 to O. 21 Using the directory and lists Opening lists with the message key You can use the message key f to open the following lists: u SMS list u Network mailbox If your network provider supports this function and the network mailbox is configured for fast access via key 1 (page 15). u Calls list (precondition: Calling Line Identification enabled) The numbers of the last 30 incoming calls are saved. Multiple calls from the same number are all saved. An advisory tone sounds as soon as a new message arrives in a list. If you press the flashing f key, you will see all the lists that contain new messages. If only one list contains new messages, this will be opened automatically. Dialling with directory/list ¤ Open directory/list. ¤ Briefly press/press and hold the talk key c (page 17). Please note: You can only dial IP addresses via VoIP. Please note: If calls are saved in the network answering machine you will receive a message if the appropriate settings have been made (see the network mailbox instructions of your network provider). f ¢ If necessary, select list q Select entry. For additional information on the lists, please see the full user guide for your Gigaset C460 IP (page 5). Opening list 22 SMS (text messages) SMS (text messages) Your unit is supplied ready for you to send SMS messages immediately. When an SMS is sent, the base station automatically establishes a connection via the fixed network. Or: §Menu§ ¢ Save Text Requirements: u Calling Line Identification (CLIP) has Select and press §OK§. The SMS is saved in the draft message list. Opening the draft message list: §Menu§ ¢ SMS ¢ Outgoing. . Please note: been enabled for your telephone connection. u Your network provider supports SMS in the fixed network (information on this can be obtained from your network provider). u You are registered with your service provider to send and receive SMS. When you call up the SMS menu for the first time, you are automatically registered with accessible SMS centres whose number you have entered. You can then receive SMS from these SMS centres. You can enter further SMS centres and register with them with the help of the registration wizard. To find out how to do this, please read the full user guide for your Gigaset C460 IP (page 5). If you are interrupted by an external call whilst writing the SMS, it is automatically saved in the draft message list. Receiving/reading SMS All received SMS messages are saved in the message list. Linked SMS messages are divided into individual SMS messages with a maximum of 153 characters, and saved as such in the incoming message list. New SMS messages are signalled on all Gigaset C46 handsets by a message in the display, the flashing message key f and an advisory tone. Please note: Reading a text message ¤ Open the incoming message list with ¤ ¤ Writing/sending/saving SMS An SMS may contain up to 160 characters. §Menu§ ¢ SMS ¢ Write Message ~ Write an SMS. §Menu§ Send Text Select and press §OK§. s/~ Enter the number with dialling code (including your local area code) from the directory or key it in manually, and press §OK§. [. . . ] The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. [. . . ]