User manual SIEMENS GIGASET C59H

[. . . ] C59H Issued by Gigaset Communications GmbH Schlavenhorst 66, D-46395 Bocholt Gigaset Communications GmbH is a licensee of the Siemens trademark Gigaset Communications GmbH 2009 All rights reserved. www. gigaset. com The handset at a glance The handset at a glance 16 i V 1 2 INT 1 07:15 14 Oct Calls SMS 3 15 14 13 12 4 5 11 10 9 8 6 7 Display in idle status Battery charge status ( page 14) Display keys ( page 18) Message key ( page 32) Access to call and message lists; Flashes: new message or new call 5 End call key, On/Off key End call, cancel function, go back one menu level (press briefly), back to idle status (press and hold), activate/deactivate handset (press and hold in idle status) 6 Hash key Keypad lock on/off (press and hold in idle status); toggles between upper/lower case and digits 7 Mute key ( page 26) Mute the microphone 8 Microphone 9 Recall key - Consultation call (flash) - Insert a dialling pause (press and hold) 10 Star key Ringtone on/off (press and hold); with an open connection: switch between pulse dialling/tone dialling (press briefly); Text input: Open table of special characters 11 Connection socket for headset ( page 15) 12 Key 1 Dial network mailbox (press and hold) 13 Talk key Flashes: incoming call; Accept a call; open redial list (press briefly); start dialling (press and hold) 14 Speaker key Switch between earpiece and speaker mode 15 Control key ( page 17) 16 Signal strength ( page 14) Green: Eco Mode activated ( page 34) 1 2 3 4 Illustration of handset on a base with SMS functionality. 1 Display symbols Display symbols The following symbols are displayed dependent on the settings and the operating status of your telephone: Signal strength i ( page 34) or Eco Mode+ icon ( page 34) Ringtone switched off ( page 39) Battery charging ( page 14) Battery charge status ( page 14) i V 08:00 Alarm switched on and wake-up time ( page 34) Current time ( page 14) Current day and month ( page 14) Name of the handset 07:15 14 Oct INT 1 02 Calls TM 10 09 08 SMS u on the network mailbox ( page 31) u TM in the list of missed calls ( page 32) u in the SMS list (dependent on base) ( page 31) u in the list of missed alarms ( page 32) Number of new messages: Signalling External call ( page 25) ث Internal call ( page 26) Alarm clock ( page 34) Anniversary ( page 30) 2 Contents Contents The handset at a glance . 5 Gigaset C59H more than just a telephone . Activating/deactivating the keypad lock . [. . . ] If you accept the call, the new messages are played back. If you do not accept the call, the network mailbox number is saved in the missed call list and the message key flashes ( page 32). With fast access, you can dial either the network mailbox or your integrated answering machine (dependent on base) directly. On bases without an answering machine, fast access to the network mailbox is preconfigured. You only need to enter the number of the network mailbox. On bases with an answering machine, the integrated answering machine is preconfigured. You can configure the network mailbox instead. Configuring fast access for the network mailbox and entering the network mailbox number Bases with an answering machine: v Set Key 1 Network Mailbox Select and press Select ( = selected). Bases without an answering machine: v Network Mailbox Continue by: ~ Entering the number for the network mailbox. The setting for fast access applies to all Gigaset C59H handsets. 33 ECO DECT ECO DECT You are helping to protect the environment with your Gigaset C59H. Setting the alarm clock Prerequisite: The date and time have already been set ( page 13). Reduced energy consumption Your telephone has a power-saving adapter plug and uses less power. Reducing radiation (dependent on base) The radiation can only be reduced if your base supports this function. The transmission power of your telephone is automatically reduced depending on the distance to the base. You can reduce the radiation of the handset and base even further by using Eco Mode or Eco Mode+. For further information, please refer to your base user guide. v Alarm Clock You can enter data in the following fields: Activation: Select On or Off. Time: Enter the wake-up time in 4-digit format. In idle status, the icon and wake-up time are displayed. A wake-up call is signalled on the display and with the selected ringtone ( page 2). If no key is pressed, the wake-up call is repeated twice at five minute intervals and then switched off. During a call, the wake-up call is only signalled by a short tone. Activating/deactivating the alarm clock and setting the wake-up time Deactivating the wake-up call/ repeating after a pause (snooze mode) Prerequisite: A wake-up call is sounding. or Snooze Press the display key or any key. The wake-up call is deactivated and then repeated after 5 minutes. After the second repetition the wake-up call is deactivated completely. 34 Using a handset as a room monitor Using a handset as a room monitor If the room monitor is activated, a previously saved destination number is called as soon as a set noise level is reached. You can save an internal or external number in your handset as the destination number. All of the handset keys are deactivated, with the exception of the display keys. The room monitor call to an external number is terminated after approximately 90 seconds. [. . . ] If you press and hold a key, the corresponding digit is inserted. Radio frequency range 18801900 MHz Standard characters 2a 3d 5 M O Q N L 4 1x 1) 2x 2) 3x 4x 5x 6x 7x 8x 9x 10x Environmental condi- +5C to +45C, 20% to tions in operation 75% relative humidity Dialling mode DTMF (tone dialling)/ DP (pulse dialling) Writing and editing text The following rules apply when writing text: u Each key between Q and O is assigned several letters and characters. u Control the cursor with u v t s Press and hold u or v to move the cursor word by word. u Characters are inserted at the cursor position. u Press the star key * to display the table of special characters. [. . . ]