User manual SIEMENS GIGASET C670

[. . . ] Hands free Talk Digital keys * Key (Ringer off by long press) Flash Key Call-by-call list key Intercom Key End/Back (On/Off by long press) Redial/Delete # Key (Lock keypad by long press) Mute Key 1 2 3 4 5 6 7 8 9 10 11 Radio signal Talk Incoming Call Ringer off Keypad lock Hands free Directory Battery Icon Handset Name Date and Time Weekday Call-by-call list key Directory Back Delete Hands free # Key Digital Keys * Key/Ringer off Redial Key Mute Flash Date Time Menu mode Registering Intercom/Internal call Ringer off Missed call Incoming call If call (8):Number of incoming calls If directory (10): Record number 10 Directory 11 Missed call (country, network and provider-dependent: not shown if VMWI network service not supported) 1 2 3 4 5 6 7 8 9 Making an external call . Read the safety precautions and the user guide before use. Explain their contents and the potential hazards associated with using the telephone to your children. Never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. [. . . ] If the handset is in the charging cradle and the AUTO ANSWER function is activated, the handset will take a call automatically when you lift it out of the cradle. When you get a call, the caller's phone number will be displayed on your handset. The caller's name and number will be both displayed if it is stored in the phonebook The phone was made according to the national standards. However sometimes the CID function can't be displayed properly for the reason of some special using condition: e. Connecting several phones on a single line or the PABX is not a standard appliance. The options are: u Directory u Last number redial list u Call history u Call-by-call list In the directory you can store up to 50 phone numbers and corresponding names. ¤ Edit the phone number and confirm with ¤ Select ADD ENTRY with q and confirm ¤ Enter the name of the contact and con¤ Enter the phone number and confirm Dialling with the directory ¤ Press f and select an entry with q. The last number redial list contains the ten numbers last dialled. Store a call-by-call number ¤ Press the C key twice. Depending on the type of list set, all numbers of the last 30 incoming calls or just the missed calls are saved. The calls list entries are retained when you change the list type. The method for entering the call-by-call number below is for your reference since it may be different for various cards. ¤ Enter a long distance number and then ¤ Select a number from the directory or ¤ Press c or d, then press C and then Enter the long distance number. Internal calls to other handsets registered to the same base are free. When you are speaking to an external participant, an internal caller can listen in on this call and take part in a conference call. Or press the star key * to call all handsets. To answer the call with the handset or base, press c or d. Starting a conference call the CONFERENCE function must be activated as described above. The line is engaged with an external call. Transferring a call to another handset You can transfer an external call to another handset (connect). When the internal participant answers: ¤ If necessary announce the external call. The external call is transferred to the other handset. [. . . ] A defect arising from using non-Gigaset approved accessories or ancillary items attached to or in connection with the telephone. If this certificate of warranty is not signed and stamped by the authorised distributor. Any other claim resulting out of or in connection with the device shall be excluded from this warranty. In the event of an after-sales issue/warranty claim please refer back to your point of purchase. [. . . ]