User manual SIEMENS GIGASET C675

[. . . ] Hands free Talk Digital keys * Key (Ringer off by long press) Flash Key Call-by-call list key Intercom Key End/Back (On/Off by long press) Redial/Delete # Key (Lock keypad by long press) Mute Key 1 2 3 4 5 6 7 8 9 10 11 Radio signal Talk Incoming Call Ringer off Keypad lock Hands free Directory Battery Icon Handset Name Date and Time Weekday Play recording/Pause Stop playing recording Previous recording Next recording Delete Answer machine On/Off Flash/Personal recording Mute/Family member recording # Key Digital keys * Key/Ringer off Back Redial key Hands free Date Time Menu mode Registering Intercom/Internal call Ringer off Missed call Incoming call If call (8):Number of incoming calls If directory (10): Record number 10 Directory 11 Missed call If flashing: Received voice message (country, network and provider-dependent: not shown if VMWI network service not supported) 1 2 3 4 5 6 7 8 9 Operating when on the move (remote control) . Read the safety precautions and the user guide before use. Explain their contents and the potential hazards associated with using the telephone to your children. Never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. [. . . ] Depending on the type of list set, all numbers of the last 30 incoming calls or just the missed calls are saved. The calls list entries are retained when you change the list type. The method for entering the call-by-call number below is for your reference since it may be different for various cards. ¤ Enter a long distance number and then ¤ Select a number from the directory or ¤ Press c or d, then press C and then Enter the long distance number. Internal calls to other handsets registered to the same base are free. When you are speaking to an external participant, an internal caller can listen in on this call and take part in a conference call. Or press the star key * to call all handsets. To answer the call with the handset or base, press c or d. Starting a conference call the CONFERENCE function must be activated as described above. The line is engaged with an external call. Transferring a call to another handset You can transfer an external call to another handset (connect). When the internal participant answers: ¤ If necessary announce the external call. The external call is transferred to the other handset. If an internal participant presses the end call key a, the other handset remains connected to the external participant. When you are speaking to an external participant, you can call an internal participant at the same time for consultation. You are connected with the internal participant. If an internal participant presses the end call key a, the other handset remains connected to the external participant. You can operate the answer machine that is integrated into the base using the keys on the base (page 2) or by remote control (other phone/mobile phone, see page 17). The phone is supplied with a pre-recorded announcement. In order to accept calls automatically the answering machine must be activated. When the answering machine is activated, an incoming call is processed as follows: After playing the announcement the answering machine generates a beep and starts recording mode. The recording mode is ended automatically after 3 minutes or when the caller hangs up. [. . . ] A defect arising from using non-Gigaset approved accessories or ancillary items attached to or in connection with the telephone. If this certificate of warranty is not signed and stamped by the authorised distributor. Any other claim resulting out of or in connection with the device shall be excluded from this warranty. In the event of an after-sales issue/warranty claim please refer back to your point of purchase. [. . . ]