User manual SIEMENS GIGASET DA610

[. . . ] Gigaset DA610 / en / A30350-M212-A601-1-UZ19 / overview. fm / 23. 04. 2012 Overview Gigaset DA610 1 2 3 4 5 6 7 8 9 10 11 12 Display and keys 1 Display ( page 4) 2 Control key ( page 5) 3 Speed dial key 4 Set key 5 Redial/pause key 6 Recall key 7 Mute key 8 Star key, selecting/deselecting the ring tone (press and hold) 9 Hash key, selecting/deselecting the key lock (press and hold) £ £ 10 Hands-free key 11 Keys for setting the volume of the handset, speaker and ring tone 12 Microphone for hands-free use @ Hands-free key LED ¤ ¤ flashes on incoming call lights up when the call is transferred to the speaker en fr fa ar 1110-01 1 Gigaset DA610 / en / A30350-M212-A601-1-UZ19 / overview. fm / 23. 04. 2012 Connecting the telephone ¤ 2 Connect the telephone connector (1) to the main telephone socket. You may need a phone adapter depending on your country. Power is supplied over the telephone line. A mains adapters is not necessary. ¤ 1 Guide the cable through the cable channel (2). ¤ 3 Connect the handset to the telephone using the coiled cable (3). First use 1 2 Lift the handset for 5 seconds and place it back in the cradle. [. . . ] Select DELETE ENTRY to delete the selected entry or DELETE ALL to delete all entries and confirm with [. Press the control key to confirm the action. Adjusting the telephone To adjust the settings of your telephone you use the K set key. You can make settings in idle mode and when the handset is lifted. Changing the language You can change the language for display messages. 5 L Press the key code for setting the language. Press the key for the desired language: Q English 3 Spanish Deleting an entry / Deleting all entries q q [ K German 2 French 4 Italian 5 Dutch Save your settings and exit the setting mode. 8 1110-01 en fr fa ar Gigaset DA610 / en / A30350-M212-A601-1-UZ19 / telephony. fm / 23. 04. 2012 Setting the date and time You can adjust the current date manually and change the format of the display. The time is updated by incoming calls with telephone number displays. You can adjust this setting if necessary ( page 12). Microphone, receiver and melody off. The telephone is completely muted. £ 2 Microphone off, receiver on, melody off. K Setting the date and time time display becomes editable. ~ Enter a 4-digit date and a 4-digit time. Use the q control key to move one position forwards/backwards. K Save your settings and exit the setting mode. The date setting format is according to the one currently set. The time setting format is always 24-hour, regardless of the set time format. K 3 Activate setting mode for the date and time. The date and You are still able to hear the person on the end of the line, however they cannot hear you. Save your settings and exit the setting mode. The mute function is activated according to these settings using the mute key during a call ( page 7). £ Setting the ringer Setting the date format K Activate setting mode. 5 Press the key code for setting the date format. 31. 12 ¤ ¤ ¤ The following optional settings are available: Melody and volume VIP melody Switching the ringer off Setting the ring tone and volume You can set the ring tone and volume or switch the ringer off. There are 10 different ring tones available and the volume can be adjusted to 5 levels (0=silent). Note The ring tones are played over the speaker if you lift the handset before commencing with the settings. You can also change both settings directly using the keys while the telephone is ringing ( page 7). Changing the ringer volume K 5 Activate setting mode for the ringer volume. D / E Increase or decrease the volume for the ringer. Press the key code for the desired date format: Q for MM/DD e. g. [. . . ] They are a precondition for the re-use and recycling of used electrical and electronic equipment. For further information on disposing of your used equipment, please contact your local authority or your refuse collection service. Contact with liquid ! If the device comes into contact with liquid: 1 Allow the liquid to drain from the device. Place the device (the keypad facing down) in a dry, warm place for at least 72 hours (not in a microwave, oven etc. ). 3 Do not switch on the device again until it is completely dry. [. . . ]