User manual SIEMENS GIGASET M34 USB

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] The working area shows the current device name of the Gigaset M34 USB. ì Enter the desired device name under Identification > Name:. The maximum length of the device name is 10 characters. ì Confirm your entry by pressing the return key (Return, Enter). The new device name is sent to the connected base station. i If you also want to change the device name of your PC for connections to another registered base station, first of all connect to the desired base station and then repeat this procedure. Registering a base station ì Open the Gigaset M34 software and select the M34 USB > Configuration option in the menu tree. ì Under Base stations click on one of the <free base> options. The Register button is activated. ì Set the base station to registration mode. ­ Hold down the Registration key until you hear an acoustic signal or see a flashing LED to indicate registration mode. ­ Refer to the operating instructions for your base station for more details. with OK. ì Click on Register to begin registration. ì Enter the PIN for the base station (factory default "0000") and confirm your entry ì Wait until registration has been completed. The Register dialog is closed. ì For further information refer to "Registering a base station" on page 15. 20 Configuring the Gigaset M34 software Connecting the base station When you register a base station, it is connected immediately. If several base stations are registered, you can choose which one to connect to. The base stations that are not connected do not need to be deregistered. This allows you to switch between different base stations without having to set them to registration mode again. ì Open the Gigaset M34 software and select the M34 USB > Configuration option in the menu tree. ì Under Base stations click on one of the base stations that is registered but not connected. The Connect button is activated. ì Click on the base station you want to connect. ì Click on Connect. Calling the Gigaset M34 USB A connection between your handset and the M34 USB allows you to access the PC through your handset. The requirement for this connection is that your handset is registered on the same base station as the Gigaset M34 USB. To create the connection between your handset and the Gigaset M34 USB, make a free internal call from the handset to the Gigaset M34 USB. ì Press the INT key on your handset. ì Choose the Gigaset M34 USB as the internal party. The internal name under which it is registered on the base station can be seen in the Gigaset M34 software under M34 USB > Configuration > Name:. ì Press the Talk or Handsfree key on the handset to make the internal connection. ! Note that your handset will be blocked to other calls for the duration of the internal connection. 21 Configuring the Gigaset M34 software When the connection is no longer required: ì Break the connection by pressing the End call key on your handset. Deregistering a base station For operation with the Gigaset M34 USB, a maximum of 6 base stations can be registered. If all spaces on the list are occupied, you must first deregister a base station before you can register another base station. A base station can only be deregistered if the Gigaset M34 USB is connected to it. ! If there is no connection to this base station or the signal strength of the connection is too low, the base station is only deregistered in the Gigaset M34 software. In this case, your PC must also be deregistered as an internal device in the base station menu. ì Open the Gigaset M34 software and select the M34 USB > Configuration option in the menu tree. The working area shows a list of the base stations already registered. ì Under Base stations, click on the registered and connected base station. The De-register button is activated. ì Click on the De-register button to deregister the selected base station. The space in the list is released. The name of the base station is replaced by the entry <free base>. 22 Configuring the Gigaset M34 software Configuring power management You do not have to do without the Gigaset M34 USB functions, even if your PC is in standby mode. You can configure the Gigaset M34 software so that your PC is automatically activated when an internal call is received. ì Open the Gigaset M34 software and select the M34 USB > Configuration option in the menu tree. The options for PC activation are shown in the working area. internal call. ì Under Wake-up, choose whether your PC is to be automatically activated for an Firmware update The firmware is the device software stored in your Gigaset M34 USB. If your Gigaset M34 USB no longer functions correctly or if you want to operate it with more recent software, you can update the firmware. [. . . ] KG, Schlavenhorst 66, D-46395 Bocholt, Germany. u Any other claims resulting out of or in connection with the device shall be excluded from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a Customers Statutory Rights, nor the manufacturer's liability for death or personal injury resulting from its negligence. u The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee. [. . . ]