User manual SIEMENS GIGASET S18H

[. . . ] s Issued by Gigaset Communications GmbH Schlavenhorst 66, D-46395 Bocholt Gigaset Communications GmbH is a trademark licensee of Siemens AG Gigaset Communications GmbH 2009 All rights reserved. www. gigaset. com Gigaset S18H Gigaset The handset at a glance The handset at a glance 1 Display in idle status 2 Charge status of the batteries = e V U (empty to full) = flashes: batteries almost empty e V U flashes: batteries charging 3 Display keys (page 15) 4 Message key Access to calls and message lists; Flashes: new message 5 Flash key - Confer (Flash) - Insert a dialing pause (press and hold) 6 End call key, On/Off key End call, cancel function, go back one menu level (press briefly), back to idle status (press and hold), activate/deactivate handset (press and hold in idle status) 7 2. 5 mm socket for headset (mono) 8 Pound (#) key Key lock on/off (press and hold in idle status) Toggle between upper/lower case and digits 9 Microphone 10 Star (*) key Ringtones on/off (press and hold) Open table of special characters 11 Key 1 Fast access to answering machine/network mailbox (press and hold) 12 Talk key Answer a call, start dialing 13 Handsfree key Switch between earpiece and handsfree mode; Lights up: handsfree activated; Key flashes: incoming call 14 Control key (page 14) 15 Signal strength i (high to low) | flashes: Out of Range 15 INT 1 V 1 2 01. 31. 09 9:45am Menu 3 14 13 12 11 7 10 8 4 5 6 9 1 Contents Contents The handset at a glance . 22 Configuring the network mailbox for fast access . 22 Viewing the network mailbox message . [. . . ] The microphone must be directed towards the monitored sound. The connection to which the room monitor is diverted must not be blocked by an activated answering machine. v Room Monitor Change multiple line input: Room M. : Select On to activate. Call to: Press the display key Edit and enter destination number. External number: select number from the directory or enter directly. Internal number: delete any stored external number. INT s (select handset or Call All, if all registered handsets are to be called) OK. Level: Set noise level sensitivity (Low or High). With Options, you can move directly to settings. Activating the room monitor and entering the number to be called 23 Handset settings v Room Monitor s Scroll to the Call to: line. Enter number as described in "Activating the room monitor and entering the number to be called" (page 23). Save changes (page 6). Changing previously set external destination number Handset settings Your handset is preconfigured, but you can change these settings to suit your individual requirements. Changing the display language You can view the display texts in different languages. v Handset Language The current language is indicated by . If you accidentally choose a language you do not understand: v 5 41 Press display keys one after the other. s Select the correct language and press OK. Changing previously set internal destination number v Room Monitor s Scroll to the Call to: line. Yes Press the display key to confirm the prompt. Enter number as described in "Activating the room monitor and entering the number to be called" (page 23). Save changes (page 6). Deactivating the room monitor remotely Important: The destination phone must support touch tone dialing and the room monitor must be set for an external destination number. Take the call from the room monitor and press keys 9 ;. The external caller will hear a deactivation signal tone and then the call will end. There will be no further room monitor calls. But the other room monitor settings on the handset (such as no ringtone) will remain activated until you press the display key OFF on the handset. To reactivate the room function with the same phone number: Turn on the activation again and save (page 23) with Save. Setting the display You have a choice of four color schemes and several different contrasts. v Display Color Scheme Select and press OK. [. . . ] If this Product was purchased in the United States of America this limited warranty will be governed by the laws of Texas, and exclude the United Nations Convention on Contracts for the International Sale of Goods. If this Product was purchased in Canada this limited warranty will be governed by the laws of the Province of Ontario and the federal laws of Canada applicable therein, and exclude the United Nations Convention on Contracts for the International Sale of Goods. If you want to learn more about Gigaset Service or for Support on your Gigaset phone, visit our web site at http://www. gigaset. com or please call 1-866-247-8758. Issued by Gigaset Communications GmbH Schlavenhorst 66, D-46395 Bocholt Gigaset Communications GmbH is a licensee of the Siemens trademark. [. . . ]