User manual SIEMENS GIGASET S445

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] Register the terminal (again) for SMS reception. Messages are only received during the day. Your terminal is stored in the database of your SMS provider as having no fixed network SMS functionality, i. e. you are no longer registered with the provider. Register the terminal (again) for SMS reception (see above). Self-help with errors The following table lists error situations and possible causes and provides notes on troubleshooting. You cannot send messages. You have not requested the CLIP service (Calling Line Identification Presentation). Ask your service provider to enable this service. 2. Feature is not supported by network provider. No number or an invalid number is entered for the SMS centre activated as the send centre. Enter the number (page 30). You receive an SMS whose text is incomplete. The provider has not yet sent the rest of the message. You have changed the ID of your mailbox. Tell your SMS contacts your new ID or undo the change (page 30). 2. Call diversion is activated with When: All Calls or the call diversion All Calls is activated for the network mailbox. Change your call diversion. 32 Operating the answering machine Operating the answering machine You can operate the answering machine that is integrated in the base station via the handset, via the keypad of the base station (page 2) or via remote operation (other phone/mobile). You can also listen to messages via remote operation using voice commands (page 38). Announcement mode You can use the answering machine in two different modes. & Record mode, the caller hears the announcement and can then leave a message. u In Announce Only mode, the caller hears your announcement but cannot leave a message. v Announcements Rec Announce / Rec Anc Only OK Press the display key to start the recording. Now speak your announcement (at least 3 sec. ). End Press the display key to end the recording. After recording, the announcement is played back for you to check. You can rerecord the announcement with New. Recording a personal announcement/ announce only Please note: u Recording ends automatically if the Operation via the handset The handset loudspeaker activates automatically if you receive an acoustic prompt or message while operating. [. . . ] . 41 changing the name of the base station . . 41 Birthday, see Anniversary Brightness (display) . . 58 71 Index Change display language . 54 Character set table special characters Charge saving function . [. . . ]