User manual SIEMENS GIGASET SL75

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] u Acknowledge tones: Confirmation tone (a rising tone sequence): at the end of the entry/ setting, when the handset is placed in the charging cradle and when an Email or a new entry arrives in the calls list. Setting the alarm clock Requirement: The date and time have already been set (page 67). v Alarm Clock Change multiple line input: Alarm Clock: Select On or Off. Time: Enter the wake-up time in 4-digit format. You will see the icon. Activating/deactivating the alarm clock and setting the wake-up time 71 Handset settings Depending on the mode of setting for the date and time, you must enter the wakeup time in 12 or 24 hour mode (see Time:, page 67). A wake-up call is signalled on the handset by the selected ringer tone (page 70). The wake-up call sounds for about 60 seconds. The display shows Alarm Clock plus the date and time. During a call, the wake-up call is signalled by a short tone. ~ a Enter new Handset PIN (four digits 09) and press OK. Press and hold (idle status). Notes: To delete the Handset PIN: leave the input field for the new PIN empty and press OK. You cannot correct wrong entries when you are entering the PIN. If necessary, cancel the input (a or ") and start the process again. Clearing handset blocking If you enter a wrong PIN three times in a row, the handset will be blocked. In the display, a corresponding notification and the handset's IP address are shown. You can only clear the blocking via the Web configurator. Start the Web configurator with the IP address displayed (page 75). Change the Handset PIN via the Admin menu (page 80). OK Press the display key to confirm the information on the handset display. a Press the End call key to switch the handset on again and register with the new Handset PIN. Deactivating the wake-up call Requirement: A wake-up call is sounding. Silence Press the display key or any key. The alarm clock is still switched on. Protecting against unauthorised access Protect the handset with a PIN known only to yourself. If a PIN is entered it is requested when the handset is switched on. When the phone is supplied no PIN has been entered. Caution: If you do not assign a PIN, every subscriber to the WLAN has free access to your handset settings. Changing the Handset PIN You can save a 4-digit Handset PIN. Notes: If you wish to clear the handset blocking at a later time, press the OK display key. The message with the handset's current IP address will be displayed again the next time you switch on. [. . . ] 71 Establishing a connection to the messenger server . 37 Global System for Mobile Communication. 131 H Handset activating/deactivating . 131 Introduction security in the WLAN . [. . . ]