User manual SIEMENS GIGASET SX303 ISDN

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] The answering machine should only be activated during the lunch hour (12:00 to 1:00 p. m. ) using announcement 1. After office hours (5:00 to 8:00 p. m. ) the answering machine should use announcement only. The following time sections must be defined: 1. Start time 5:00 p. m. , announce only Defining start times and announcements for Monday to Friday Precondition: You have selected an answering machine (page 63). s Settings s Time control s Mon - Fri s OK OK OK OK Select the menu item and confirm. **:** Announcement 1, and confirm. s Select ann. s Announcement 1 { OK OK Select the menu item and confirm. Announcement 1, Announcement 2, Select Announcem. Press the display key. 81 Setting the answering machine (on SX353isdn) s Start time ~ W Save entry OK Select the menu item and confirm. The start time specifies the end of the previous time section. Press the display key to open the submenu. OK Confirm. Hold down (back to idle status). j Setting time control for Saturday or Sunday By factory default, the time control for working days is used: As for Mon-Fri. Precondition: You have selected an answering machine (page 63). s Settings s Time control either . . . or . . . OK OK Select the menu item and confirm. Hold down (back to idle status). s Saturday s Sunday . . . then OK OK s As for Mon-Fri j OK Activating/deactivating time control By factory default, time control is deactivated. Precondition: You have at least set a start time (page 81) and have selected an answering machine (page 63). s Settings s Time control either . . . Activate? OK OK Select the menu item and confirm. Select the menu item and confirm ( = activated). Deactivate time control: Select the menu item and confirm. OK OK 82 Setting the answering machine (on SX353isdn) Activating/deactivating automatic listen in You can set up your answering machine so that it automatically switches a handset assigned to it or the base station (CX263 or SX353 only) to automatically listen in when it is recording a message. By default, automatic listen in is deactivated. Assigning a terminal Only one terminal (handset or base station) can be assigned to an answering machine for listen in. You can choose a terminal to which one of the answering machine's receive MSNs is assigned. Only terminals that support handsfree mode are displayed. [. . . ] 40 Mark as "new" N Network providers (number list) . 170 Number, see Phone number or Entry 177 Index O OK key . 11 P PABX Operating when connected to a PABX. 36, 171 Adding the phone number of an SMS message sender . [. . . ]