User manual SIEMENS GIGASET SX761

[. . . ] s First steps Gigaset SX761 dsl Gigaset 2 Contents Contents The Gigaset SX761 dsl . 6 Do your part for the environment (ECO) . 6 Local area networks with Gigaset products . 7 Internet telephony and connecting analogue phones . [. . . ] Two of these extensions are connected to your Gigaset SX761 dsl via the Phone 1 and Phone 2 ports, while the remaining extensions are connections for SIP clients. You can assign each extension the relevant VoIP account for incoming and outgoing calls and make other settings for each extension (e. g. call waiting, call forwarding, caller display). The process for configuring extensions, which use the two telephone ports of the Gigaset SX761 dsl, is somewhat different to that for the SIP extensions. The latter must be VoIP telephones, which are connected to the Gigaset SX761 dsl, or PCs with a SIP client, which are connected to the Gigaset SX761 dsl. ì In the Advanced Settings menu, select: Telephony ­ Extensions 65 Configuring Advanced Settings Phone connectors The two telephone ports Phone 1 and Phone 2 of the Gigaset SX761 dsl have the internal phone number *1 or *2. ì Click Edit to adapt the settings for an entry (page 67). SIP Proxy Server In addition to the telephones connected to your Gigaset SX761 dsl, you can configure PCs with SIP clients in your local network with the assistance of the SIP proxy servers integrated as internal extensions in your device and then use these to make calls via VoIP. Use the IP address displayed in your local network for registering your VoIP phones or your other SIP clients with your SIP proxy server. 66 Configuring Advanced Settings Port The default port via which SIP clients register with the SIP proxy server is entered here. SIP client accounts ì Make the extension settings for each SIP user account, which is used for registering SIP clients with the SIP proxy server of your device. The User name and Extension number are displayed for identifying the individual telephone ports. These extensions have the internal phone numbers *3 to *6. ì Click Edit to adjust the settings for an entry (see below). ì Click Delete to delete an entry. Configuring extensions The Extension shows either the selected port of the Gigaset SX761 dsl (Phone 1 or Phone 2) or the SIP client. The Extension number for the extension is preset and is displayed as a call number. ì Enter a name for identifying the port in the User name field. You can also leave the default setting for Phone 1 and Phone 2. ì Select the Phone number from the list (your VoIP service provider or one of your VoIP service providers) for this extension. The list of numbers for Internet telephony is the one you set up in the VoIP menu (page 62). All outgoing calls are directed by default via this phone number. Incoming calls for the selected phone number are signalled. ì Select Receive calls for all numbers if you wish to receive all incoming calls on all extensions. 67 Configuring Advanced Settings ì You can configure Divert calls with the following options for the Phone 1 and Phone 2 ports: ­ Divert always: Each call for the extension is forwarded to the extension selected in the Divert calls to field. ­ When busy: A call for the extension is forwarded to the selected extension if the extension is busy. ­ No reply: A call for the extension is forwarded to the selected extension if the call is not answered. ì Select the Call waiting option if you want to permit a signal for an incoming call while you are on a call. extension. ì Select the Call pickup option to have the option to accept all incoming calls on this ì Select Hide own number for outgoing calls (CLIR) if you want to prevent the number of this extension being displayed for outgoing calls. Note: Many service providers either do not support this function at all or only unreliably. Contact your service provider if you want to be certain that CLIR, for example, is actually supported. ì Click OK to apply the settings. 68 Configuring Advanced Settings Dialing Plans On this screen you can: u Enter your area code, u Define for Internet telephony whether the area code should be automatically dialled, u Specify which phone numbers or prefixes are to be dialled via which VoIP account. ì In the Advanced Settings menu, select: Telephony ­ Dialing Plans ì Area code Enter the Area code for your current location. ì Predial area code for local calls through VoIP If you activate this function, the area code will be dialled automatically when you make a local call via a VoIP provider. This will save you having to enter the area code which was previously always necessary with VoIP. ì Choose whether you want to use Dialing Plans. ì In the Phone number field, enter an individual number or also the first digits of phone numbers (e. [. . . ] 13 Institute of Electrical and Electronic Engineers see IEEE Internet . 48 setting up multiple connection services . 6 Internet connection changing configuration. 12, 23 Internet protocol see IP protocol Internet service provider . [. . . ]