User manual SIEMENS GIGASET SX790 ISDN

[. . . ] SX790 ISDN Gigaset Communications GmbH Frankenstr. 2a, D-46395 Bocholt Manufactured by Gigaset Communications GmbH under trademark license of Siemens AG. 2011 Gigaset products bearing the trademark 'Siemens' will exclusively use the trademark 'Gigaset'. Gigaset Communications GmbH 2010 All rights reserved. [. . . ] In this case, the recipient cannot reply to you directly. Sending and receiving SMS messages on ISDN PABXs is only possible via the MSN number assigned to your base. Activating/deactivating the SMS function If you deactivate the SMS function, you cannot send or receive any SMS messages with your phone. The settings you have made for sending and receiving SMS messages (e. g. , the numbers of the SMS service centres) and the entries in the incoming and outgoing lists are saved even after deactivation. Or: OK Activate the SMS function (default setting). Version 4. 1, 21. 11. 2007 53 SX790/795 ISDN / IM-Nord EN / A31008-N415-R201-1-SM19 / sms_BRD_neutral. fm / 18. 08. 2010 Sending SMS (text messages) Troubleshooting SMS problems Error codes when sending E0 Calling Line Identification permanently restricted (CLIR) or Calling Line Identification not activated. FD Connection to SMS service centre failed; see self-help. The SMS is played back. The "display call number" feature is not activated. Ask your service provider to enable this feature (there is a charge for this). No agreement is in place between your mobile phone operator and your fixed line network SMS service provider. Obtain information from your fixed line network SMS service provider. Your terminal has been recorded by your SMS provider as having no fixed line network SMS functionality i. e. , you are not registered with the provider. Send any SMS to automatically register your telephone to receive SMS. Messages are only received during the day. The terminal is recorded in your SMS provider's database as having no fixed line network SMS functionality i. e. , you are not registered with the provider. Obtain information from your fixed line network SMS service provider. Send any SMS to automatically register your telephone to receive SMS. Self-help with errors The following table lists problem situations and possible causes and provides advice on troubleshooting. You cannot send messages. You have not requested the CLIP service (Calling Line Identification Presentation). Ask your service provider to enable this service. SMS transmission has been interrupted (e. g. , by a call). The network provider does not support this feature. No number or an invalid number is entered for the SMS service centre set as the active send service centre. The service provider has not yet sent the rest of the SMS. You have stopped receiving SMS messages. [. . . ] This will avoid possible health risks and personal injury, and also ensure that all the relevant regulations are complied with. Mounting the base on the wall 41 mm approx. 5. 5 mm Version 4. 1, 21. 11. 2007 87 SX790/795 ISDN / IM-Nord EN / A31008-N415-R201-1-SM19 / SX790_ISDNSIX. fm / 18. 08. 2010 Index Index A Access code . 72 Appointment/anniversary displaying missed . 69 Birthday, see Anniversary Busy on Busy . [. . . ]