User manual SIEMENS GIGASET SX810 ISDN

[. . . ] 2012 Congratulations By purchasing a Gigaset, you have chosen a brand that is fully committed to sustainability. this product?s packaging is eco-friendly!More than just a telephone Gigaset SX810 ISDN ?More than just a telephone Your ISDN connection offers you two telephone lines simultaneously. [. . . ] If no SMS service centre is entered, the SMS menu only contains the entry Settings. enter an SMS service centre ( page 53). You can enter data in the following fields: Active Send: Select Yes if SMS messages are to be sent via the SMS centre. : Enter the number of the SMS service centre and insert a star if your service provider supports personal mailboxes. : Enter the number of the e-mail service. Send via: Specify MSN, via which SMS messages should be sent. Please note Ask your service provider for details on entering service numbers if you wish to use personal mailboxes (prerequisite: Your service provider supports this function). Entering/changing SMS service centres Find out about the services and special functions offered by your service provider before you make a new application and/or before you delete pre-configured numbers. Sending an SMS via another SMS service centre Activate the SMS centre (2 to 4) as the active send service centre. 2012 Sending SMS (text messages) SMS messages to a PABX u You can only receive an SMS when the Calling Line Identification is forwarded to the extension of the PABX (CLIP). The CLIP evaluation of the SMS centre number is completed in your Gigaset. U Depending on your PABX, you may have to add the access code (external line prefix) before the number of the SMS centre. , by sending an SMS to your own number: once with and once without the access code. U When you send SMS messages, your sender number may be sent without your extension number. In this case, the recipient cannot reply to you directly. Sending and receiving SMS messages on ISDN PABXs is only possible via the MSN number assigned to your base. Activating/deactivating the SMS function If you deactivate the SMS function, you cannot send or receive any SMS messages with your phone. The settings you have made for sending and receiving SMS messages (e. , the numbers of the SMS service centres) and the entries in the incoming and outgoing lists are saved even after deactivation. 2012 Sending SMS (text messages) Troubleshooting SMS problems Error codes when sending E0 Calling Line Identification permanently restricted (CLIR) or Calling Line Identification not activated. The "display call number" feature is not activated. Ask your service provider to enable this feature (there is a charge for this). [. . . ] Please note Procedure in the event of an error If the update procedure fails or your phone does not work properly following the update, repeat the update procedure as follows: Close the "Gigaset QuickSync" program on the PC. Remove the USB data cable from the telephone. You can now: u Display incoming calls on your PC u Dial from Outlook u Synchronise your handset directory with Outlook u Download caller pictures (. Bmp) from the computer to the handset u Download pictures (. [. . . ]