User manual SIEMENS GS34P490

[. . . ] KG (SHC), die ihrerseits das Gigaset-Geschäft der Siemens AG fortführte. Etwaige Erklärungen der Siemens AG oder der SHC in den Bedienungsanleitungen sind daher als Erklärungen der Gigaset Communications GmbH zu verstehen. Wir wünschen Ihnen viel Freude mit Ihrem Gigaset. Chère Cliente, Cher Client, la société Gigaset Communications GmbH succède en droit à Siemens Home and Office Communication Devices GmbH & Co. [. . . ] ì If necessary, activate the Check firmware version option (not available for all base stations). ì Insert the CD-ROM into your CD-ROM drive. ! For Gigaset 4170/75isdn and Gigaset 3070/75isdn you will have to activate the Check firmware version option. ì Only for Gigaset SX205/255isdn, Gigaset SX303/353isdn, Gigaset 4170/75isdn ì and Gigaset 3070/75isdn: Activate the Wireless via Gigaset USB Adapter option. Only for Gigaset SX205/255isdn, Gigaset SX303/353isdn: If you want more than the wireless Internet connection, you can install additional software. You can choose the following software components: talk&surf 6. 0 CAPI FAX The talk&surf software enables you to configure your base station and connected handsets. You can manage your directory and copy it to the handsets. You can also view your calls lists and manage the call charges. For further information please read the talk&surf 6. 0 operating instructions. You only need the CAPI driver if you want to send faxes using your PC. For more information please read the Chapter "Installing the CAPI driver" in the talk&surf 6. 0 operating instructions. You can send faxes from your PC if you connect the Gigaset USB Adapter directly to the USB port. For more information please read the corresponding chapter in the talk&surf 6. 0 operating instructions. ì Select the installation folder. ì When prompted, connect your Gigaset USB Adapter to your PC. This will start the Windows automatic hardware recognition. ì During hardware recognition, select the option Look for suitable driver for the ì device (the exact wording will depend on the Windows operating system you are using). If registration is not possible, (base station not ready for registration or not connected to the power supply, wrong PIN), you will see a message indicating the cause of the problem. 11 Configuration Connection tab Connecting the Gigaset USB Adapters DECT to the PC Serial port: The Gigaset USB Adapter will look for a free COM port for connection. Manual changing of the setting is only necessary where several USB adapters are connected to the same PC/Laptop. Configuration state, once the port was found. If no port is found, the field remains empty. Select this option only if more than one Gigaset USB Adapter is connected. Then select a COM port in the upper pane. Status: No automatic detection at program start-up Data/wireless connection Connection partner: After successful registration, you will find the name of the connected base station here. If several base stations have been registered, select the base station your Gigaset USB Adapter is to set up a connection to. If your Gigaset USB Adapter has set up a connection to a base station, this field will show a bar diagram reflecting the reception strength and quality of the connection. If no connection is made, the fields remain empty. Depending on the surroundings, the range for wireless connection between local and partner station outdoors is approx. With an open connection, you will see Connection set up here. [. . . ] u The guarantee is valid in the country of purchase. It applies only if the device is operated in the relevant geographical area in accordance with the information on the packaging and in the operating instructions. Siemens is not liable in any circumstances for downtime, loss of profits, loss of data or loss of any other information. The customer alone is responsible for safeguarding such data and information. [. . . ]