User manual SIEMENS HP34W510J

[. . . ] Instruction manual HP 34W 510 J Making cooking as much fun as eating Please read this instruction manual. This will ensure that you make use of all the technical benefits the cooker has to offer. It will provide you with important safety information. You will then be familiarised with the individual components of your new cooker. [. . . ] If the gas has not burned, repeat the above steps starting from step 1. Turn off the bottom gas burner knob after 30 minutes. 23 Procedure that must be applied for the electric grill In order to clear the odour of the new oven, heat the empty oven with door closed. The grill is activated and the oven light comes on as you press the button. 2. Turn the electric grill knob of the oven to the right and set it to the x position. Turn off the electric grill knob after 30 minutes. Turn off the light and grill button by pressing it. Pre cleaning the burner body and upper cover 1 2 3 6 4 5 Clean the burner covers (1) and bodies (2) with water and washing up liquid. Refit the burner body and cover in the burner channel (4) without damaging the spark plug (3) and flame safety pipe (4). Be sure to place the burner cover precisely on the burner body. 24 Pre cleaning the accessories Please wash the accessories thoroughly with soapy water and a cleaning cloth before using them. Setting the hob The hob is equipped with 4 gas burners. Here you can find out how to ignite the gas burners. To ignite the burners Always make sure that the burner cap is fitted properly on the burner cup. The slots of the burner cup must not be obstructed. It must remain open during all operation of the appliance. Turn the control dial for the desired burner anti clockwise to the : ignition position. Push the control dial in fully and hold for 1 3 seconds. The gas that flows is ignited by the ignition spark. This activates the safety function, which automatically cuts the gas supply to the burner concerned if the flame goes out. The ignition function must not be operated for longer than 15 seconds. If the burner has not lit after 15 seconds, you should stop operating the ignition function. Wait at least one minute before trying to light the burner again. 25 4. The flame is not stable between the · OFF and settings. For this reason, you should select a setting between the maximum and minimum flame settings. Otherwise repeat the process from step 2. Switching off 6. Turn the control dial · clockwise to the OFF position. d If you operate the control dial for a burner that is still warm shortly after you have switched it off, gas will flow out. [. . . ] 25 watt heat resistant spare bulbs can be obtained from our after sales service or your local specialist. Switch off the circuit breaker in the fuse box. Place a tea towel in the cold oven to prevent damage. Unscrew the glass cover by turning it anti clockwise. d 4. [. . . ]