User manual SIEMENS HW1405P2/01 INSTALLATION INSTRUCTIONS

[. . . ] 9 Installing the base and charging cradle . Activating/deactivating the keypad lock . Illustration of operating steps in the user guide . 27 27 27 27 28 28 Making calls using network services . [. . . ] Press twice to go back to the previous message. Press twice to skip to the next but one message. If playback is interrupted for over a minute, the answering machine returns to idle status. Deleting messages You can either delete all old messages together or individually. Deleting all old messages During playback or pause: Options Delete Old List OK Press the display key to confirm the prompt. Yes Press the display key to confirm the prompt. Deleting individual old messages During playback or pause: Delete Press the display key. Picking up a call from the answering machine You can pick up a call while the answering machine is recording or is being operated via remote operation: c / Accept Press the talk or display key. Recording stops and you can speak to the caller. If 2 seconds of the call have already been recorded when you pick it up, the call will be displayed as a new message. You can answer the call even if it is not signalled on the handset. Marking a message as "new" A previously played back "old" message is displayed as a "new" message again. During message playback: * Press the star key. An announcement informs you of the message's new status. Playback of the current message is cancelled. Playback of next message starts, if applicable. There will be no call charges if you hang up now. Operating when on the move (remote operation) You can check and activate your answering machine from any other telephone (hotel, pay phone etc. ), or initiate ringback from the answering machine with an SMS. Preconditions: u You have set a system PIN other than 0000 ( page 69). u The phone you are using for remote oper- Please note: You can configure your telephone so that the first ring tone is muted on all calls ( page 44). This means that the time selected for the call acceptance predetermines how long the caller must wait before the answering machine answers the call. ation has touch tone dialling (DTMF), i. e. you hear different tones when you press the keys. Alternatively, you can use a code transmitter (available from your mobile phone retailer). Calling the answering machine and playing back messages ~ 9~ Dial your own number. When you hear your announcement, press 9 and enter the system PIN. You will be informed whether any new messages have been recorded. You can now operate the answering machine with the keypad. The following keys are used for operation: A To return to the start of the current message. Press twice to go back to the previous message. 0 Delete current message. Resetting fast access for the answering machine using key 1 By default, key has been assigned for fast access to the integrated answering machine. However, if you have set the network mailbox for fast access ( page 52), you can reset this setting. [. . . ] 47 Answer only mode (answering machine) . 47 recording a personal announcement/ answer only . 34, 35 Answering machine, see also Network mailbox Appointment . 54 Appointment/anniversary display missed . [. . . ]