User manual SIEMENS JB13AA50

[. . . ] KG (SHC), die ihrerseits das Gigaset-Geschäft der Siemens AG fortführte. Etwaige Erklärungen der Siemens AG oder der SHC in den Bedienungsanleitungen sind daher als Erklärungen der Gigaset Communications GmbH zu verstehen. Wir wünschen Ihnen viel Freude mit Ihrem Gigaset. Chère Cliente, Cher Client, la société Gigaset Communications GmbH succède en droit à Siemens Home and Office Communication Devices GmbH & Co. [. . . ] Please remember: The connection to the wireless network adapters will be interrupted until you enter the new SSID on them as well. SSID broadcast If this option is enabled (default setting), the Gigaset SX551 WLAN dsl will send the SSID in all data transmissions and your Gigaset SX551 WLAN dsl's SSID will be displayed on PCs that have a wireless network adapter. In this case, eavesdroppers could use the SSID to gain access to your network. If you deactivate SSID broadcast, your Gigaset SX551 WLAN dsl's SSID will not be displayed. This increases the protection against unauthorised access to your wireless network. However, you must make a note of the SSID. You will need this to log on your PC. ì Select the Off option to deactivate SSID broadcast. Transmission mode This function is only shown in the window if the transmission mode Super G is deactivated (see page 97). The IEEE 802. 11g standard permits data transfer up to 54 Mbit/s and the IEEE 802. 11b standard up to 11 Mbit/s. For the best possible data transfer rates in your network select IEEE 802. 11g only. To operate clients with older wireless network adapters in your network, select IEEE 802. 11b/g (mixed). ì Select the required transmission mode for your wireless network. ì Select the required sending power for your device. Sending power We recommend that you select a sending power with a range to suit the spatial environment of your local network. In this case, user access is controlled by user accounts and passwords, in addition to WPA encryption. A RADIUS server acts as an authentication server. You can select the new WPA2 standard if this is supported by all components in your wireless network, or select WPA2 / WPA if you are using devices that only support WPA. ì Select the required option in the Security field. ì Enter the IP address of the RADIUS server in the RADIUS server IP address field. ì Enter the port of the RADIUS server in the RADIUS server port field. ì In the RADIUS server secret key field, enter a keyword conforming to the conventions of the RADIUS server, which is to be used by the server for authentication. ì Click OK to apply the settings. 100 Configuring the Advanced Settings WEP Encryption If WPA is not supported by all components in your wireless network, we recommend that you activate WEP Encryption on your wireless network components. ì In the Security field, select the option WEP. ì Select the Authentication type: ­ Select Shared to require that each client logs in to the network with a specified key. ­ Select Open to permit data transfer within your wireless network without the need for a key. You can choose either the standard 64-bit key or the more robust 128-bit key for encryption. The keys are generated in hexadecimal or in ASCII format. You must use the same keys for encryption and decryption for both the Gigaset SX551 WLAN dsl and all your wireless network adapters. ì Select the Key length: 64 bits or 128 bits. whether you wish to enter the key manually or have it generated automatically by means of a Passphrase. Generating the key by means of a Passphrase keys are generated. ì Enter a Passphrase (up to 32 characters) and confirm it by entering it again. [. . . ] 16, 49 Internet protocol see IP protocol Internet provider . 38 ISP see Internet provider Key length . 94, 173 LED behaviour after initial connection . 17 Local IP address see Private IP address Local network . [. . . ]