User manual SIEMENS JH23UA50

[. . . ] KG (SHC), die ihrerseits das Gigaset-Geschäft der Siemens AG fortführte. Etwaige Erklärungen der Siemens AG oder der SHC in den Bedienungsanleitungen sind daher als Erklärungen der Gigaset Communications GmbH zu verstehen. Wir wünschen Ihnen viel Freude mit Ihrem Gigaset. Chère Cliente, Cher Client, la société Gigaset Communications GmbH succède en droit à Siemens Home and Office Communication Devices GmbH & Co. [. . . ] If there is a star (*) at the end of the assigned number in the directory, then the number will be dialled via the non-standard connection; otherwise the standard connection that has been set will always be used (page 26). Directory the directory by pressing the s key. You can save 100 entries in the directory. 16 characters Managing directory entries You can use the directory menu to, e. g. : u Change or delete entries or send them to another of the base station's handsets u Delete the directory or send it to another handset ¤ With the handset in idle status, open Please note: ­ You may also have to enter the phone number with the local area code for local calls when making VoIP calls to the fixed network (depending on the VoIP provider). You should therefore always save phone numbers in the directory with the area code. Alternatively, you can also use Web configurator to define an area code, which is automatically inserted in front of all numbers that are dialled without an area code for calls made via VoIP. ­ You can assign a number from the directory to a key for speed dialling. to open the menu. For additional information, please see the full user guide for your Gigaset C450 IP on the Internet at www. siemens. com/gigaset. ¤ Select a directory entry and press §Menu§ Last number redial list The last number redial list contains the ten numbers last dialled with the handset. ¤ Briefly press the talk key c to open the last number redial list. s ¢ §Menu§ ¢ New Entry ~ Enter number and press §OK§. If you add a star (*) at the end of the number, then the number will always be dialled via the non-standard connection (page 26). ~ Enter the name and press §OK§. Storing a number in the directory Assigning a key §Menu§ ¢ Shortcut Assign the current entry for quick dial to Q or one of the keys from 2 to O. 21 Using the directory and lists Opening lists with the message key You can use the message key f to open the following lists: u SMS list u Network mailbox If your network provider supports this function and the network mailbox is configured for fast access via key 1 (page 15). u Calls list (precondition: Calling Line Identification enabled) The numbers of the last 30 incoming calls are saved. You will find the relevant functions in the submenus §Menu§ ¢ Settings and §Menu§ ¢ Audio Settings (page 14). The base station settings are carried out using a registered Gigaset C46 handset. Setting the ringer volume The ringer volume is the same for all types of ring. §Menu§ ¢ Audio Settings ¢ Ringer Volume Or in idle status: t Press briefly. Then: q Adjust the volume and press §OK§. a Press and hold (idle status). Adjusting the loudspeaker volume You can set the loudspeaker volume for handsfree talking to five different levels and the earpiece volume to three different levels. You can only adjust the loudspeaker volume during a call. q Adjust the volume and press §OK§. Activating/deactivating the ringer tone You can turn off the ringer tone on your handset before you take a call or while the phone is in idle status. You can take a call as long as it is displayed on the screen. Deactivating the ringer tone P Press the star key and hold until the Ú icon appears in the display. Press and hold the star key in idle status. Re-activating the ringer tone P Please note: The handsfree volume can only be adjusted when this function is set. If t is assigned a different function, e. g. Make settings (see above). Activating/deactivating advisory tones §Menu§ Select and press §OK§ ( = on). All advisory tones are activated or deactivated. ¢ Audio Settings ¢ Advisory Tones 24 Setting handset/base station Using the handset as an alarm clock Activating/deactivating the alarm clock §Menu§ Changing the base station system PIN You can change the base station's 4-digit default system PIN ("0000") to a 4-digit PIN known only to yourself. §Menu§ ¢ Settings ¢ Base ¢ System PIN ~ Enter current system PIN and press §OK§. [. . . ] Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. [. . . ]