User manual SIEMENS KU14LA41 annexe 1

[. . . ] 4 5 5 en Installation location S Move the upper bearing pin (3) to the opposite side. S Reposition the screw on foot plate (4) on the opposite side. S Insert the door into the upper bearing pin (5). [. . . ] Colour White Aluminium Brown Order no. KZ 10430 KZ 10432 KZ 10431 3 en Appliance: K2134W. . Z4103W2 Z4103A2 Z4103B2 Adjusting the décor plates Décor plates up to 4 mm thick or adhesive foil can be inserted under the décor frame. Décor plates thicker than 4 mm Fig. 4 On all sides reduce a 5 mm edge to a thickness of 4 mm. 5 Cut a groove all the way round in which the parts of the décor frame can fit. 20 mm larger. Attaching the décor frame and décor plate Fig. S Lift out the stopper (2) with a knife. S Carefully place the appliance on its back. S Insert the supplied auxiliary tool (3) into the lower elongated hole in the side décor strips and hammer the steel nail into the door. S Screw on the side décor strips (4), (5) and handle (1). S Insert the décor plate (6) sideways. S Screw on the upper (7) and side décor strips (8). S Firmly screw on the décor strips (4) and (5). Dimensions of the décor plates: KUL14. . 757, 5 x 486 mm Prior to installation, check the dimensions of a décor plate from an old appliance!If the dimensions are too large, shorten the plate where applicable. 4 en Décor plate with inadequately small dimensions: S plate too small by up to 3 mm, place between the décor strips ensuring that there is no gap. [. . . ] Otherwise the refrigerating unit must work harder, increasing the power consumption. Avant de lire cette notice, veuillez déplier les volets illustrés composant ses dernières pages. Installing appliance under worktop The socket (220 240 V ~, 50 Hz, 10 A or higher) must be situated near the appliance, on the right or left side. Hotplates are not permitted in the worktop above refrigerators and freezers! Installing appliance under worktop in 820 mm high cavity Fig. [. . . ]