User manual SIEMENS MKK22LAD4A

[. . . ] 22 Avoiding placing children and vulnerable people at risk . 30 Note the chill zones in the refrigerator compartment . 25 Before using your appliance for the first time . 28 Switching off and disconnecting the appliance . [. . . ] If greater demands are made of the appliance, the power consumption will increase. After installing the appliance, wait at Least 1 hour before connecting it to The socket must comply with the Outside Europe: Check whether the Indicated current type of the Appliance specifications are on the Connect the appliance to a socket near the appliance. The socket must be freely accessible even after the appliance has been installed. Fold out the last page with the diagrams. The appliance and diagrams may differ according to features. You can vary the shelf: Pull out and remove the shelf. Cans or bottles): Take out the front part of the shelf And push under the rear part. You can give yourself a better overview: Pull out a shelf. Pull out the shelf, lower and swing Out to the side. You can remove the container: Pull out the container all the way, lift You can remove the storage compartment: Lift up storage compartment and You can store large bottles in the lower storage compartment: Push storage compartment to the When you open and close the door: The bottle holder prevents the After the appliance has been switched on, it may take several hours until the set temperature has been reached. Do not put in any food until the selected temperature has been reached. The sides of the housing are partly heated slightly. This prevents condensation in the area of the door seal. Switching off and disconnecting the appliance The appliance no longer cools. If you do not use the appliance for a prolonged period: 1. Pull out the mains plug or switch off Keep pressing the button +/- until the display indicates the required temperature. The temperature in the refrigerator compartment will affect the temperature in the freezer compartment. Change the temperature in the refrigerator compartment in order to change the temperature in the freezer compartment. Temperatures which are set higher in the refrigerator compartment will increase temperatures in the freezer compartment. Sticker OK (not all models) You can use sticker OK to check whether the temperature in the refrigerator compartment reaches +4 °C or lower. If the sticker does not indicate OK, gradually reduce temperature. When the appliance is switched on, it may take up to 12 hours until the set temperature is reached. [. . . ] Appliance is not level: Align appliance using a spirit level. Bottles or receptacles are touching each other: Move bottles or receptacles away from each other. Odottahw­stluaF you call customer service, use this table to check whether you can rectify the fault yourself. ~ "Switching off and disconnecting the appliance" on page 28 If the temperature is too warm, check temperature again after a couple of hours. [. . . ]