User manual SIEMENS MOTION 501 BTE

[. . . ] If you have any further questions, please contact your Hearing Care Professional. 3 2 Contents 3 Your Motion hearing instrument - Motion M - Motion M VC - Motion P 6 4 Intended use 8 5 General notes on safety 9 6 Handling of standard and rechargeable batteries 12 Low battery indicator Inserting the batter y Removing the batter y Battery compartment lock 7 Inserting and removing your hearing instrument 16 - Inserting your hearing instrument - Removing your hearing instrument 8 Turning your hearing instrument on and off - Power-on delay 17 18 9 Changing the hearing program - Via push button - Via remote control 10 Changing the volume - Via volume control - Via remote control 19 4 2 11 Audio input 20 - Attaching the audio shoe: - Removing the audio shoe: 22 - AutoPhoneTM function - Manual telephone program 24 25 26 12 Telephoning 13 e2e wireless 2. 0 14 Maintenance and care 15 Accessories - Charger - Remote control - Tek wireless enhancement 16 Troubleshooting tips 17 Technical information 18 Disposal information 19 Your hearing instrument configuration 29 31 33 34 5 3 Your Motion hearing instrument Motion M optional with LifeTube (battery type: 13) Motion M VC optional with LifeTube (battery type: 13) 1 4 7 9 3 2 8 5 1 4 6 9 3 2 8 5 6 Your Motion hearing instrument 3 Motion P (battery type: 13) Features: 1 4 6 9 3 2 8 7 5 1 2 3 4 5 6 7 Earhook Battery compartment Charging contacts Microphone openings Audio input Volume control Program button with on/off function 8 Cover for programming socket 9 Typeplates red = right hearing instrument blue = left hearing instrument 7 4 Intended use Hearing instruments are intended to improve the hearing of hearing impaired persons. Diagnosis and prescription of a hearing instrument must be performed by hearing health specialists, e. g. ENT doctors, audiologists or acousticians. Read and follow the instructions of this user guide to avoid injuries or damage to the hearing instrument. [. . . ] Unlock Open the battery compartment to the first stop. The battery compartment can now be opened completely. Ask your Hearing Care Professional if you need assistance. 15 7 Inserting and removing your hearing instrument Inserting your hearing instrument Turn your hearing instrument off. Hold the earmold / LifeTip between your thumb and index finger and insert it carefully into the ear canal. You may find it helpful to pull your ear slightly upward or to the back. Place your hearing instrument behind your ear. If the typeplate of your hearing instrument is in red, the hearing instrument is intended for the right ear. If the typeplate is in blue, the hearing instrument is for the left ear. Removing your hearing instrument Hold the earmold / LifeTube between your thumb and index finger and carefully pull it out. You may find it helpful to lightly push your ear from the back. 16 Turning your hearing instrument on and off 8 Turn on: Fully close the battery compartment to turn the hearing instrument on. Turn off: Press the battery compartment downward to the first stop to turn the hearing instrument off. You can also use the remote control to turn the hearing instrument on and off. Power-on delay Your hearing instruments are equipped with a , , poweron-delay" feature which can be activated by your Hearing Care Professional. This allows you to turn the hearing instrument on with an automatic delay, so that you may insert the hearing instrument into your ear without experiencing unpleasant feedback (whistling). Connect audio input only to device conform to IEC 60065. (IEC-Norm for audio, video and other electronic devices. ) 20 Audio input 11 Attaching the audio shoe: Open the battery compartment 1 . 2 1 Align the contacts of the audio shoe with the contacts of the hearing instrument. Slide the audio shoe over the hearing instrument until it snaps into the end position. The hearing instrument automatically switches to the corresponding audio shoe program. Removing the audio shoe: Slide the audio shoe in the opposite direction to that for attachment and take it off. Close the audio shoe cover. 21 12 Telephoning AutoPhoneTM function With the AutoPhoneTM function, your hearing instrument will automatically switch to the telephone program when you hold a telephone handset near your hearing instrument (*). It will return to the previously used hearing program after you have finished speaking and have moved the handset away from the hearing instrument. (*) AutoPhone magnet accessory Not all telephones produce a magnetic field strong enough to activate the AutoPhone function. In this case, use the AutoPhone magnet, enclosed in your hearing instrument package, and attach it to the telephone receiver to activate the AutoPhone function. See the AutoPhone magnet user guide for instructions on how to position the magnet. [. . . ] Provides synchronization of the settings in the system. If you change the volume or program on one hearing instrument, the other hearing instrument is automatically adjusted. Your Hearing Care Professional can activate or deactivate the wireless functionality of your hearing instruments. The performance of e2e wireless 2. 0 may be affected by electromagnetic interference ­ e. g. [. . . ]