User manual SIEMENS MOTION BTE

[. . . ] Motion BTE User Guide 2 Introduction 1 Dear customer, Congratulations!You have selected a hearing instrument from Siemens. This hearing instrument was individually designed for your hearing impairment and is fitted specially to your personal hearing profile. These instructions, together with guidance from your Hearing Care Professional, will help you understand how your new hearing instrument works. [. . . ] Removing your hearing instrument Hold the earmold / LifeTube between your thumb and index finger and carefully pull it out. You may find it helpful to lightly push your ear from the back. 16 Turning your hearing instrument on and off 8 Turn on: Fully close the battery compartment to turn the hearing instrument on. Turn off: Press the battery compartment downward to the first stop to turn the hearing instrument off. You can also use the remote control to turn the hearing instrument on and off. Power-on delay Your hearing instruments are equipped with a , , poweron-delay" feature which can be activated by your Hearing Care Professional. This allows you to turn the hearing instrument on with an automatic delay, so that you may insert the hearing instrument into your ear without experiencing unpleasant feedback (whistling). The delay can be programmed by your Hearing Care Professional to be 6, 12 or 18 seconds. 17 9 Changing the hearing program Via push button (only Motion M and Motion P) Your hearing instruments offer up to 5 hearing programs for specific listening environments. Each time you press the program button, your hearing instruments switch to the next program, confirming each change with an acoustic signal. Example Turn your hearing instruments on. You hear the acoustic signal for program 2. Via remote control Refer to the remote control user guide. If you are wearing two hearing instruments, the hearing program will be changed on both instruments simultaneously if e2e wireless 2. 0 is activated. Your Hearing Care Professional can write down the personal program configuration of your hearing instrument on page 33. Your Hearing Care Professional can activate or deactivate the acoustic signals in your hearing instruments. 18 Changing the volume 10 The volume of your hearing instruments is controlled automatically and there is no need to manually adjust it. Via volume control (only Motion M VC and Motion P) Should you prefer manual volume control, your Hearing Care Professional can program the hearing instrument for manual adjustment. Rotate the volume control with your louder index finger to select the desired listening volume. softer Via remote control Refer to the remote control user guide. Manual volume control is deactivated when you use a remote control. 19 11 Audio input Your hearing instrument is equipped with an audio input. Together with an audio shoe it enables the connection between the hearing instrument and e. g. an FM system, tape recorder, television or an infrared device. This way the sound is coming directly from the sound source. That can be useful for adults in difficult listening situations and for children in classrooms. NOTICE Use only the F5 or L5 audio shoes (labelled inside the audio shoe). They are designed exclusively for the your hearing instruments. [. . . ] For detailed information and instructions refer to the Tek user guide or ask your Hearing Care Professional. 28 Troubleshooting tips 16 Your hearing instruments are extremely reliable devices. Should a problem occur, it can usually be corrected quickly. Use these troubleshooting tips to resolve simple issues. Problem Sound is weak Possible solution Replace / recharge empty battery. [. . . ]