User manual SIEMENS MQ95530

[. . . ] The changeover from normal operation to energy saving mode, and vice versa, is made by pressing a button. Normal operation Energy saving mode or OFF When normal operation is activated, symbol " can be readjusted by pressing buttons + and - . When energy saving mode is activated, symbol " " appears on the display. [. . . ] The setpoint " appears on the display. The set- point can be readjusted by pressing buttons + and - . When the energy saving setpoint is set to " 0 ", the controller is switched off, that is, the MQ95530. . . In that case, symbol " " does not appear. Automatic operating mode change over period of time can be adjusted with buttons + and - after pressing the hour glass button. The operating action of the reset depends on the setting of the DIL switch, from normal operation to energy saving mode / OFF, or vice versa. The operating mode can be manually reset before the delay time has elapsed. When the delay is active, the hour glass symbols appears on the display. The digital display shows the actual room temperature and the symbol of the operating mode currently active. Maintenance Sensor calibration The controller is maintenance-free. If the temperature on the display does not agree with the room temperature effectively measured, the temperature sensor can be recalibrated. For that purpose, both buttons displayed can be changed by a maximum of +/- 3 Kelvin by pressing the + and buttons. Five seconds after the last push of a button, the controller will automatically return to the normal operational statuses. Change of batteries (only with batterypowered versions) + and must be pressed simultaneously for 3 seconds. Then, the temperature If the battery symbol appears, the battery power is almost exhausted and the batteries should be replaced. Technical data Power supply Operating voltage · MQ95530 at L - N · MQ95530. 1 Frequency (MQ95530) Power consumption (MQ95530) Battery life (MQ95530. 1) Control output Q12 (N. C. contact) Rating MQ95530 (AC 230 V) Rating MQ95530. 1 (AC 24. . . 250 V) Control output Q14 (N. O. contact) Rating MQ95530 (AC 230 V) Rating MQ95530. 1 (AC 24. . . 250 V) Switching differential SD Setpoint setting range Increments Factory setting normal operation Factory setting energy saving mode Setting range of operating mode changeover time Increment Factory setting Operation Climatic conditions Temperature Humidity Transport Climatic conditions Temperature Humidity Mechanical conditions Storage Climatic conditions Temperature Humidity AC 230 V +10/-15 % DC 3 V (2 x 1. 5 V AAA Alkaline batteries) 50 or 60 Hz 4VA > 1 years (AAA Alkaline batteries) max. [. . . ] contact) Rating MQ95530 (AC 230 V) Rating MQ95530. 1 (AC 24. . . 250 V) Switching differential SD Setpoint setting range Increments Factory setting normal operation Factory setting energy saving mode Setting range of operating mode changeover time Increment Factory setting Operation Climatic conditions Temperature Humidity Transport Climatic conditions Temperature Humidity Mechanical conditions Storage Climatic conditions Temperature Humidity AC 230 V +10/-15 % DC 3 V (2 x 1. 5 V AAA Alkaline batteries) 50 or 60 Hz 4VA > 1 years (AAA Alkaline batteries) max. 5(2) A 1K 5. . . 35 °C (normal operation) 0 (OFF) and 5. . . 35 °C (energy saving mode) 0. 5 °C 20 °C 8 °C 0. 5. . . 24 h 0. 5 h 0 h (not activated) to IEC 721-3-3 class 3K5 0. . . +50 °C <95 % r. to IEC 721-3-2 class 2K3 -25. . . +60 °C <95 % r. [. . . ]