User manual SIEMENS SL55

[. . . ] s Be inspired SL55 Contents Safety precautions . . . . . . . . . . . . . . . . . . . . . 9 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . 11 Charge battery . . . . . . . . . . . . . . . . . . . . . . . 13 Switching on your phone for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Indicates forbidden service providers (depending on SIM card). m Setup Your service provider is displayed: List Display list of preferred networks. MenuKmKNetwork KSelect function. 83 Create new entry: Select empty line, press Entry, then select another entry from the list of service providers and confirm. Change/delete entry: Select entry, press Change, then select another entry from the list of service providers and confirm or press Clear. User group L Depending on service provider, you can create groups with this service. These can have access to internal (company) information, for example, or special tariffs apply. The details can be clarified with your service provider. "User group" must be deactivated for normal phone use (phone code, p. Select group You can select or add groups other than preferred groups (see below). Code numbers for the groups are obtained from your service provider. access In addition to network control for a user group, it is possible to set whether outgoing calls outside the group are permitted. If the function is deactivated, only calls within the group are permitted. Preferred grp If activated, only calls within this standard user group can be made (depending on the network configuration). Band selection L Select either GSM 900, GSM 1800 or GSM 1900. Fast search When this function is active, network reconnection is speeded up (and standby time is reduced). 84 m Setup Automatic settings: Permanent illumination: switched on. Automatic activation of the Car Kit profile when phone is inserted in cradle. Accessories MenuKmKAccessories KSelect function. Car Kit Only in combination with an original Siemens handsfree Car Kit (p. The profile is activated automatically as soon as the phone is inserted into the cradle. User-definable settings Auto answer (factory default: off) Calls are accepted automatically after a few seconds. Eavesdropping is possible! Headset Only in conjunction with an original Siemens headset (p. The profile is automatically activated when headset is plugged in. User-definable settings Auto answer (factory default: off) Calls are accepted automatically after a few seconds (except where the ringer is switched off or set to beep). You should therefore be wearing the headset. Automatic setting Accept call with Call key or PTT key (Push To Talk), even when key lock is activated. Auto answer If you do not notice that your phone has accepted a call, there is the danger that the caller may eavesdrop. Message in display. Auto off (factory default: 2 hours) The phone is powered by the car's power supply. You can adjust the time between switching off the ignition and the automatic switching off of the phone. Acoustic set2 Choose a different audio setting if desired for your Car Kit. m Setup ProSlide MenuKmKProSlide KSelect function. 85 Volume Adjust the volume of the music when opening and closing the keypad. Open. melody Set the music to be played when the keypad is opened. Closing melody Set the music to be played when the keypad is opened. ProSlide lock Enable/disable automatic keylock when closing keypad. [. . . ] 43 profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 push. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 send information . . . . . . . . . . . . . . . . . . . . . . [. . . ]