User manual SIEMENS SL88

[. . . ] Gigaset 4010 Micro, CHINA, A31008-G4010-B222-1-7619 umschl_v. fm 26. 05. 0 Gigaset SL 88 HWDCD8516(3) P/TSD Be inspired User Manual and Safety Precautions Gigaset 4010 Micro, CHINA, A31008-G4010-B222-1-7619 umschl_v. fm 26. 05. 0 General Congratulations Congratulations on your purchase of the Siemens Gigaset telephone system!This phones 2. 4 GHz frequency and high-speed digital voice encoding provide reception and voice clarity that is superior to other cordless phones. And, its digital spread spectrum technology will provide you with secure, private conversations. II Gigaset 4010 Micro, CHINA, A31008-G4010-B222-1-7619 umschl_v. fm 26. 05. 0 General Quick Reference Handset Turning on/off the handset (see page 6) hold down a Turning keypad protection on/ hold down off (see page 7) Turning tones on/off (see page 46) Making an external call (see page 10) Redialing a number (see page 15) Saving a called number in the directory (see page 21) Dialing from the directory (see page 22) Dialing from the call log (see page 31) Setting the handset volume (see page 46) hold down o z if necessary D select entry c z MENU D Send to Dir D o[Name] if necessary D ?D Call Log DF or G Save c [ [ if necessary F G entry c [ Handset Volume [ c or D c MENU D Sound Settings Making an Internal call to a speF and D to select internal user cific handset Making an Internal call to a all F and D Intercom Call handsets (see page 10) Transferring a call to another handset Making a consultation call Setting the date and time (see page 8) Setting the alarm clock (see page 17) c c a F and D to select internal user [ F and D to select internal user [ ; end: End MENU D Appoint. /Clock MENU D Appoint. /Clock Set date and time F G D Save Enter settings F G D Save [D Date/Time [ [ [D Alarm Clock III Gigaset 4010 Micro, CHINA, A31008-G4010-B222-1-7619 umschl_v. fm 26. 05. 0 General Handset Diagram Status LED (light) Lights up during a call; Flashes for: Incoming calls New messages Alarm calls, appointments, anniversaries Display (display field) Charging status = empty U full flashes: Battery low Current functions and display keys Annabella 07 . 19. 03 Signal strength Navi key Talk key Accept call Dial number Switch from speakerphone to handset. e 01:13pm { MENU With the display keys, you have access to the current functions. [. . . ] The handset that has been registered under number 4 will be deregistered. It is possible to assign a different internal number (see page 36) or a different internal name (see page 36) to a handset later. 34 Gigaset 4010 Micro, CHINA, A31008-G4010-B222-1-7619 mobilt_an. fm 26. 05. 04 Handset operation Deregistering handsets F Press left on the navi key (INT) and the list of handsets is displayed. E D Scroll to the handset that is to be deregistered. MENU Press Menu. D [ Scroll to Dereg. Handset PIN [ Enter the PIN (factory setting 0000) and confirm. Yes a Confirm by pressing Yes. Switching base stations Prerequisite: The handset is registered at more than one base stations. The handset can be set to a certain base station (e. g. at home or in the office) set to Best Base and it is automatically switched to the base station with the best reception. or MENU Press Menu. D [ Scroll to H/Set Settings and confirm. H/Set Settings D [ Scroll to Select Base and confirm. Select Base D [ Scroll to the desired base or select Best Base and confirm. 35 Gigaset 4010 Micro, CHINA, A31008-G4010-B222-1-7619 mobilt_an. fm 26. 05. 04 Handset operation Changing the name of a handset The names INT 1, INT 2, and so on are assigned automatically. However, you can change these names, for example, to ANNE or OFFICE (10 characters maximum). F Press left on the navi key (INT) and the list of handsets is displayed. Enter the new name. E D Scroll to the desired handset Edit o Save Press Save. Changing a handset's intercom number You can change the number of a handset. F Press left on the navi key (INT) and the list of handsets is displayed. Intercom Intercom Call INT Eric 4 < MENU Four handsets are registered already. "Intercom Call" is only displayed if more than one user is registered. MENU Press Menu. handsets are displayed. Assign Number [ Scroll to Assign Number and confirm. All registered E D Select the desired handset If necessary: o Enter an available intercom number. E D o Scroll to a different intercom and change it first. [ confirm to save changes. If the selected intercom telephone number has already been assigned to a different handset, you will hear an error tone (descending tone sequence). 36 Gigaset 4010 Micro, CHINA, A31008-G4010-B222-1-7619 mobilt_an. fm 26. 05. 04 Handset operation Making internal calls Internal calls are calls to other registered handsets; they do not require an outside line. For example: F Press INT on the navi key (left side) and the list of handsets is displayed Your own handset is identified by "<" . D E Scroll to the handset you wish to call. c or Press Talk. e. g. Y Simply enter the number of the handset you wish to call and you are automatically connected. a End the call: Press End. Call forwarding You can forward an external call to another handset. F Press INT on the navi key (left side) and the list of handsets is displayed Your own handset is identified by "<" E D Scroll to the handset you wish to call. c a Press Talk. When the other handset answers, announce the external call then: Press End. Instead of announcing the call, you can immediately press the End key. If the internal user does not answer or if the line is busy the call comes automatically back to you. 37 Gigaset 4010 Micro, CHINA, A31008-G4010-B222-1-7619 mobilt_an. fm 26. 05. 04 Handset operation Consultation call If you are on an external call you can call another internal handset and conduct a consultation call without hanging up on the external caller. You are automatically reconnected to the external caller when you end the consultation call. F Press INT on the navi key (left side) and the list of handE D c Scroll to the handset you wish to call and press Talk. Ending the Consultation Call: End sets is displayed Your own handset is identified by <. The external caller is put on hold. Press the End softkey - You are now reconnected to the external call. or a Press the End key and the call is transferred to the consulted handset. Accepting or rejecting a waiting call If you receive an external call during an internal call you will hear the call waiting tone if you subscribe to this feature from your local telephone company. Accept Press Accept - The internal call is ended; you are con- nected to the external call. or Reject Press Reject You stay connected to the internal user. 38 Gigaset 4010 Micro, CHINA, A31008-G4010-B222-1-7619 mobilt_an. fm 26. 05. 04 Handset operation Joining a call ("Barging In") Under normal circumstances if an internal user is conducting an external call a second internal user can join in. However, the Gigaset SL 88 allows you to turn this feature off if privacy is desired. Turning this function on/off MENU Press Menu. D [ Scroll to Base Settings and confirm. [. . . ] Batteries are warranted to be free from defects at the time of purchase. EXCLUSIONS: This warranty does not cover (a) the adjustment of customer-operated controls as explained in the appropriate model's instruction manual, or (b) the repair of any product, which has been altered or defaced. This warranty shall not apply to the cabinet or cosmetic parts, antenna, buttons, batteries, or routine maintenance. This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SIEMENS including, but not limited to, any malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance, damage from leaking batteries, operation contrary to furnished instructions, shipping or transit accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect line voltage, fire, floor or other Acts of God, or normal wear and tear. [. . . ]