User manual SIEMENS TE501201RW

[. . . ] Included in delivery2 Overview2 Safety instructions3 Controls5 Before using for the first time6 Water filter7 Settings8 Preparation using coffee beans10 Preparation using ground coffee 11 Dispensing hot water 11 Preparing milk froth 11 Maintenance and daily cleaning12 Tips on saving energy14 Service programme15 Frost protection 16 Accessories 16 Disposal17 Guarantee17 Technical specifications17 Simple troubleshooting18 dear Coffee Connoisseur. Congratulations on purchasing this fully automatic espresso machine from Siemens. included in delivery (see overview image at the start of the instructions) A, B, C, D and E at the start of the instructions) 1 Bean container 2 Aroma cover 3 Selector for grind setting 4 Drawer (ground coffee/cleaning tablet) 5 Brewing unit (Figure E) A) Brewing unit b) Door c) Eject lever for brewing unit d) Lock e) Cover 6 Milk frother (Figure C) removable a) Steam valve b) Metal sleeve c) Frothing tube d) Steam nozzle e) Air hole 7 Height-adjustable coffee outlet 8 Drip tray (Figure D) a) Panel b) Coffee grounds container c) Drip tray for coffee outlet d) Grate for coffee outlet e) Float 9 Power on/off switch O/I (insertion aid for water filter) 19 Storage compartment for Please read and follow the operating instructions carefully and keep them for later reference. Enclose these instructions when you give this appliance to someone else. [. . . ] Press and hold buttons B (11) and A (12) simultaneously for at least 5 seconds. The time after which the appliance should switch off is indicated by the number of LEDs that now light up. Setting the brewing temperature The brewing temperature can also be set. Press and hold buttons B (11) and A (12) for at least 5 seconds. the set Brewing temperature is indicated by the number of LEDs that now light up. Now press the start button (10) repeatedly until the required number of LEDs light up to indicate the temperature: Press and hold the start button (10) for at least 5 seconds. The set number of LEDs will light up to indicate that the selected temperature has been saved successfully. Note: If no button is pressed within 90 s econds, the appliance switches to stand-by mode without saving the new settings. In this case, the previously saved brewing temperature setting is retained. The selector (3) for grind setting adjusts the grind settings from coarse to fine. Adjust the grinding unit only while it is running!Now heats up for approximately 20 seconds. As soon as button and LED F lights Up, immerse the milk frother so that it reaches the bottom of a cup or glass that is one-third filled with milk. Pull out the milk frother (6) to open it. Escaping steam is very hot and may cause liquids to sputter. Do not touch the metal sleeve or aim it at anyone. Push the milk frother (6) in to close it. Hold the milk frother (6) by the plastic part only. The milk frother must be cleaned before drawing hot water. Pull out the milk frother (6) to open it. Hot water runs out of the milk frother outlet (6) for about 40 seconds. Stop the process by pushing in the milk frother (6). [. . . ] During transport and storage, the appliance must be completely emptied first. The following accessories are available from retailers or from customer service: Information: The appliance must be ready for use and the water tank (16) filled. Place a large container under the milk LED F flashes and the appliance now If LED F lights up, open the milk frother (6) by pulling it out and release steam for about 15 seconds. Press the power on/off switch O/I (9) to switch off the appliance. [. . . ]