User manual SIEMENS TE651209RW

[. . . ] Dear Coffee Connoisseur, Congratulations on purchasing this fully automatic coffee machine from Siemens. This instruction manual describes a number of versions of the appliance with minor differences. Please also take note of the enclosed Quick reference guide, which you can then keep in the specially provided compartment 16 until you need it again. How to use these instructions: You can open up the front cover of this instruction manual to see illustrations of the appliance with each part numbered. [. . . ] Water hardness Set this to the hardness of the local water supply. Level 1, 2, 3, 4 or Softening system can be selected. The preset level of water hardness is level 4. Use I to choose the desired water Hardness and touch B to confirm your choice. FFIt is important to set the water hardness correctly, so that the appliance indicates accurately when the d escaling programme should be run. You can check the water hardness using the enclosed test strip or by asking your local water supplier. If a water softening system is installed in the house, please select the Softening system setting. Briefly dip the test strip in the water and Check the result after one minute. Automatic shut-down Setting how long the appliance should wait after the last drink was prepared before it automatically switches itself off. You can specify values from 15 minutes to 8 hours. Use I to choose the desired interval And touch B to confirm your choice. Coffee temperature Specifying the temperature for coffee drinks and hot water. the setting applies to all types of drink preparation. Use I to choose the desired temper- Ature level and touch B to confirm your choice. Water filter Specifying whether a water filter should be activated or whether no filter is used. You can choose Activate new filter or No filter. FFUsing a water filter can prevent the build-up of limescale. Water filters are available from retail outlets or from customer services (see the section "Accessories"). FFImportant: Before you can use a new water filter it will need to be rinsed. Use the measuring spoon 8 to press the water filter firmly into the water tank 5. Fill the water tank with water up to the "max" mark. Connect the milk tube 4c to the milk system 4b and the suction pipe 4d. [. . . ] The water filter does not stay in position in the water tank. The water filter is not mounted correctly. Firmly press the water filter straight down into the tank connection. The coffee grounds are not compact and are too wet. [. . . ]