User manual SIEMENS TK 69

[. . . ] Before using your appliance for the first time . 1 Mains switch 2 Buttons a) Hot water 0 b) Steam = 3 Display with 4 function buttons 4 button d 5 on" button 2 6 Rotary knob for adjusting the filling quantity (-(/8-8 7 Rotary knob for adjusting the coffee strength / - 7 8 Cleaning button + 9 Descaling button4 10 Document holder 11 Cord store 12 Height adjustable coffee outlet 13 Froth nozzle B Warming up milk a Rotary knob A Frothing up milk b Mark c Upper sleeve d Nozzle body e Outlet nozzle f Hose with adapter g Choke 14 Rotary knob for degree of ground coffee 15 Bean container with aroma cover 16 Ground coffee duct with cover = cleaning tablet duct 17 Door for brewing unit 18 Brewing unit a) Push button (red) b) Handle 19 Right cover of the appliance 20 Cup shelf (pre warming function) 21 Left cover of the appliance 22 Detachable water tank 23 Coffee dregs tray (dishwasher proof) 24 Tray (for residual water) 25 Drip plate 26 Contacts 27 Filter setting 28 Milk container a) Lid for milk container b) Connection hose with adapter 29 Sunken macchiato plate (suitable for glasses up to 13 cm high) Please read these operating instructions carefully and keep in the document holder 10!This appliance is designed for domestic use and for processing normal quantities of food and not for industrial use. Connect and operate the appliance only in accordance with the specifications on the rating plate. [. . . ] Dried residue is difficult to remove and impairs formation of the milk froth. Milk drinks such as cocoa for example, can be prepared using the warming up milk setting B. ) sunken macchiato plate 29 the possibility also exists to use tall glasses (up to approx. 13 cm high), for example to prepare latte macchiato. q Exchange drip plate 25 with macchiato plate 29. Q Place glass under the outlet nozzle and draw milk froth according to the instructions. Q Then place the glass under the coffee outlet 12 and draw the desired amount of coffee. The water which is released from the machine is very hot. The appliance has been set at the factory so that coffee can be brewed without any additional programming. These basic settings can be changed with the function buttons under display 3. Warning Do not switch off the appliance during programming. The appliance must be switched on before the basic settings can be changed. The following settings can be changed: - Language - Water hardness - Filter setting - Temperature - Current time - Timer function - Energy saving mode Factory settings have a grey background in this chapter see example opposite. To change the display to the desired language: q q q q q Hold down button % on display 3 for at least 3 seconds. I The following languages are available: : q q q q q = hardness 2 Hold down button % on display 3 for at least 3 seconds. select HARDNESS WATER with < or >. Press button % until the number in the display flashes. If external water softeners are used in the domestic water system or if filtered water is used, select HARDNESS WATER 1. Follow the instructions enclosed with the filter!Q Hold down button % on display 3 for at least 3 seconds. Note: Change or remove used filter 27 as soon as system message FILTER CHANGE is displayed or after 2 months at the latest!If a new filter is not inserted, check the setting for FILTER NO/OLD and the water hardness. [. . . ] These tablets have been specially developed for this appliance and are available from customer service (order no. Never use descaling tablets or other descaling agents. While the cleaning programme is running approx. 15 minutes - processes and instructions are indicated on display 3. [. . . ]