User manual SIEMENS TP507DX4

[. . . ] Familiarising yourself with your appliance . 58 Dispensing a coffee drink made from fresh beans . 59 Dispensing a coffee drink made from ground coffee . 64 Connecting appliance to WLAN home network (Wi-Fi) with WPS function . [. . . ] You can find the Home Connect settings in the basic settings for your appliance. Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance is connected to your home network. Description Switch off the wireless module with prolonged absence or to save energy. note: In networked standby mode , your appliance requires a maximum of 2 W. Display network and appliance information Reconnect the appliance to your home network. Note: You cannot operate your appliance via the "Home Connect" app without a network connection. Note: With the "Home Connect" app only switch-off is possible. Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appliance connected to the Home Connect server and if Remote Diagnostics is available in the country in which you are using the appliance. Tip: For further information and details about the availability of Remote Diagnostics in your country, please visit the service/support section of your local website: www. You can use this function to update the software of your appliance, e. The "Home Connect" app informs you about available software updates. Running software update Requirements ¡ The appliance is connected to your Home network and your mobile device. The app and the display indicate that a software update is available. Start the software update now or later on. Wait until the display shows "Software update successful". The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration): ¡ Unique appliance identification (con- Sisting of appliance codes as well as the MAC address of the Wi-Fi communication module installed). Status of any previous reset to factory settings. This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time. Note: Please note that the Home Connect functions can only be utilised with the Home Connect app. Information on data protection can be retrieved in the Home Connect app. declaration of Conformity BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality meets the essential requirements and other relevant provisions of the Directive 2014/53/ EU. A detailed RED Declaration of Conformity can be found online at www. [. . . ] This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU. customer Service If you have any queries, are unable to rectify faults on the appliance yourself or if your appliance needs to be repaired, contact Customer Service. You can solve many problems yourself by consulting the information on troubleshooting in these instructions or on our website. [. . . ]