User manual SIEMENS W10

[. . . ] Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 SIEMENS HWCD8518(3)P/TSDL Be inspired Siemens W10 Expandable cordless phone system User Manual 1 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 Table of contents Preparing to use your phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 The pack contains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing the phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Descriptions of displays of the handset and the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can also dial a number and then pick up the speaker from the base to make a call. Handset Press Talk key and then enter a number, or enter a number and then press the Talk key to make a call. Outgoing call (Last number redialing) Press the Redial key, and then the relevant characters (REDIAL) will be displayed on the screen. Press or key to browse the outgoing call records. Then press the Talk key on the handset or the Hands-free/Dial back key on the base, and the displayed number will be 12 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 automatically dialed out. Or Press the Talk key on the handset or the Hands-free/Dial back key on the base. Press the Redial key to automatically dial out the last dialed number. Deleting a single outgoing number Be sure the handset or the base is in standby. Press or key to browse and select the outgoing records. Then press the Flash/Clear key on the handset or the base. The screen will display "Delete". Press Flash/Clear key again to delete the selected record. Deleting all outgoing numbers Be sure the handset or the base is in standby. Press the Outgoing Call (Redial/Down/Vol Down) key. Then long press the Flash/Clear key on the handset or the base, do not release it until the LCD displays "Delete All". Press Flash/Clear key again to delete all the records. External call and power indicators When the base is powered, the power indicator will light. When answering or making external calls, the external call indicator will light. Call ending function Press the End/Delete/"INT" key on the handset or the End key on the base when finishing a call. Note: Do not use Talk or Hands-free/Dial back key to end a call; otherwise the phone will hang up. Change channels In events of interference when using the handset talking, press Channel/Select key to change to another channel. Temporary tone dialing This function is designed for pulse dialing users, which can change the pulse dialing to tone dialing temporarily to access the service system that requires tone dialing. For example, after accessing banks or credit card companies, if 13 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 the user wants to operate in their internal system, then he/she must change the pulse dialing to tone dialing temporarily. For example, you are required to enter your bank account number: 1. Act according to the voice instructions over the phone. When finish, you can hang up the phone, and then the phone returns to pulse dialing. Base holding Base -- call holding Press the Hold key when talking to pause, and press again to resume the call. Intercom mode Searching for handset / base and intercom Base paging handset Press the Intercom /Exit key on the base. Press Talk key on the handset to stop the ring and start talking to the base. When finished, press the Hands-free/Dial back key on the base or Talk key on the handset to terminate the call. Handset paging base Press Intercom /Exit key on the handset. Press the Hands-free/Dial back key or pick up the handset from the base to stop the ring and start talking by handset. [. . . ] Insert new batteries into the battery compartment. Place the handset with batteries inserted back in its the charger. Note: For the first time, the batteries should be charged for at least 12 hours before use. Battery type: Ni-Cd batteries GPI GP30 AAAK3BMJ or the same type. Safe use of the batteries 1. [. . . ]