User manual SIEMENS WIQ163H

[. . . ] Instruction Manual and Installation Instructions en Serie IQ Table of Contents Your Siemens washing machine . 3 Information concerning waste disposal . 3 Protection of the environment / Hints and tips . 4 Introducing your washing machine 5 Control panel . [. . . ] q Press the - Childproof lock" button. The childproof lock / appliance lock is permanently deactivated. i If the childproof lock / appliance lock is permanently deactivated, the $" symbol on the display panel goes out. Permanently deactivate childproof lock / appliance lock (programme active) q Press and hold down the start/stop" button (4 seconds) until the start/stop" illuminated ring flashes. q Press and hold down the start/stop" button (4 seconds) until the start/stop" illuminated ring flashes. q Press the - Childproof lock" button. The childproof lock / appliance lock is permanently deactivated. 33 Resetting standard settings You can reset standard settings which have been changed (exception: time). There are two options available for reset ting standard settings. i Settings cannot be reset while a programme is running. Option 1 Changes to the childproof lock and si gnal are cleared, the childproof lock is deactivated and the memory locations are deleted. 4 seconds simultaneously press the upper and lower buttons on the right side of the display panel. New status: Memory1, 2, 3: Childproof lock: Signal: Empty OFF 4 Return to the programme page. Option 2 Changes to the childproof lock and si gnal are cleared, the childproof lock is deactivated and the memory locations are deleted. The language of the text on the display panel must be reselected. 4 seconds simultaneously press the upper and lower buttons on the left side of the display panel. New status: Memory1, 2, 3: Childproof lock: Signal: Empty OFF 4 Return to the language selection. 34 Changing the programme sequence Changing selected settings While the selected programme is running, the spin speed can be changed and addi tional options (exception: Prewash") can be switched on or off. q Press the Change" button. q Press the Spin speed" button until the desired spin speed is displayed. or q Press the Options" button and switch additional options on or off. 35 If Childproof lock: ON" preselected q Press the start/stop" button for approx. start/stop" illuminated ring flashes. When the required changes have been made: q Press the start/stop" button. The"start/stop" illuminated ring lights up. i When the programme restarts, the childproof lock / appliance lock is re activated. If Childproof lock: ON" preselected q Press the start/stop" button for ap prox. start/stop" illuminated ring flashes. i When the programme restarts, the childproof lock is reactivated. Cancelling active programme A programme which has been selected and started can be ended prematurely. q Lightly press the "on/off" button, a run ning programme or a selected setting is cancelled. [. . . ] Simultaneously hold the foot in place and do not adjust the height. All four feet must be firmly on the floor. The lock nuts of all four appliance feet must be screwed tightly against the housing!Loud noise generation, vibrations and "wandering" may be due to incorrect alignment! A replacement mains cable can be obtai ned from customer service. [. . . ]