User manual SIEMENS WLM20460BY

[. . . ] Safety instructions ­ The washing machine is heavy - take care when lifting it. ­ Warning: frozen hoses may tear/burst. Do not install the washing machine outdoors or in areas where there is a risk of frost. ­ The washing machine may be damaged. [. . . ] Adjust the height by tuning the appliance foot. All four appliance feet must be placed firmly on the floor. The washing machine must not be able to wobble. Check the alignment of the washing machine with a spirit level and correct if necessary. 2. Tighten the lock nut against the housing. The lock nuts on all four appliance feet must be screwed tightly against the housing. Insert and tighten the screws. Installation instructions Electrical connection Connect the washing machine to an alternating current and using only a properly installed and grounded socket. The mains voltage and specifications on the washing machine must match Technical specifications. For information about the connected load and required fuse specifications. Ensure that: ­ the main plug fits into the socket outlet, ­ the cable cross-section is adequate, ­ the earthing system has been installed correctly. A damaged power cord may be replaced by an electrician only. A replacement power cord is available from customer service. Do not use multiple plugs/connectors or extension cables. If a residual current operated circuit-breaker is used, use only a type which features this symbol : Only this symbol guarantees compliance with the currently valid regulations. Mains plug: ­ do not insert into/pull out of the socket with damp hands. ­ do not pull the plug out of the socket by pulling on the power cord. ­ never pull out the plug while the appliance is in operation. Manufacturer (see Operating instructions) 0810 / 9000 422 089 page 6: The transport bolts must be removed after transportation. To prevent unused detergent from flowing into the outlet during the next wash: Pour 1 litre of water into dispenser II and start the Drain or Spin programme. Contents Safety instructions . . page 6: Technical Technical specifications Dimensions (width x depth x height) Weight Power supply 60 x 44 x 84. 2 cm 64. 5 kg Nominal voltage 220-240 V, 50 Hz Nominal current 10 A Nominal power 2300 W 100-1000 kPa (1-10 bar) According to currently valid European Standard 60456 Page . . . . . . . . 1 . . . . . . . . 1 . . . . . . . . 1 . . . . . . . . 2 . . . . . . . . 2 . . . . . . . . 2 . . . . . . . . 3 . . . . . . . . 4 . . . . . . . . 5 . . . . . . . . 5 . . . . . . . . 6 . . . . . . . . 6 . . . . . . . . 7 Water pressure Test programmes Read these instructions before switching on the washing machine. Also follow the separate Operating instructions. Retain all documents for subsequent use or for the next owner. 5 6 7 Safety instructions ­ The washing machine is heavy - take care when lifting it. [. . . ] The lock nuts on all four appliance feet must be screwed tightly against the housing. Insert and tighten the screws. Electrical connection Connect the washing machine to an alternating current and using only a properly installed and grounded socket. The mains voltage and specifications on the washing machine must match Technical specifications. For information about the connected load and required fuse specifications. [. . . ]