User manual SIGMA 486

[. . . ] ENGLISH Thank you very much for purchasing a Sigma Lens. In order to get the maximum performance and enjoyment out of your Sigma lens, please read this instruction booklet thoroughly before you start to use the lens. This lens also permits manual focusing even in the autofocus mode. With the camera set to the One-Shot AF (AF-S) mode, it is possible to manually override the autofocus while the shutter release button is pressed halfway. When operating this lens in manual focus mode, it is recommended DESCRIPTION OF THE PARTS (fig. 1) Adapter Ring Focus Ring Distance Scale Focus Index Line Focus Mode Switch Filter Holder Mount Guide Plate that correct focus be confirmed visually in the viewfinder rather than relying on the distance scale. [. . . ] (Multi-Pattern, Multi-Zone and Honeycomb metering may not prove accurate. ) It is recommended to check composition of your image through the FILTER Filters cannot be mounted on the front of the lens. If you wish to use filters, please use gelatin type. Please cut the gelatin filter, using the guide plate accessory as a pattern, and insert the filter into the filter holder at the rear of the lens. (fig. 3) viewfinder as the extraordinarily wide angle of view of this fisheye lens may capture extremities of the unsuspecting photographer. ATTACHING TO CAMERA BODY When this lens is attached to the camera body it will automatically function in the same way as your normal lens. Please refer to the instruction booklet for your camera body. On the lens mount surface, there are a number of couplers and BASIC CARE AND STORAGE Avoid any shocks or exposure to extreme high or low temperatures or to humidity. Please keep them clean to ensure proper connection. To avoid damaging the lens, be especially sure to place the lens with its front end down while changing the lens. When you take a picture, please remove the lens cap and the For extended storage, choose a cool and dry place, preferably with good ventilation. To avoid damage to the lens coating, keep away from mothballs or naphthalene gas. Do not use thinner, benzine or other organic cleaning agents to adapter ring (fig. 1-) not just the lens cap, to avoid vignetting. remove dirt or finger prints from the lens elements. Clean by using a soft, moistened lens cloth or lens tissue. This lens is not waterproof. When you use the lens in the rain or SETTING THE EXPOSURE MODE The sigma lens functions automatically after mounting to your camera. Please, refer to the camera instruction book. near water, keep it from getting wet. It is often impractical to repair the internal mechanism, lens elements and electric components damaged by water. Sudden temperature changes may cause condensation or fog to FOCUSING This lens features Sigma's built-in Hyper Sonic Motor (HSM). [. . . ] You can adjust the focus by turning the focus ring. Please refer to camera's instruction manual for details on changing the camera's focusing mode. For Nikon, Pentax and Sony mounts, it is only possible to use AF with camera bodies which support motors driven by ultrasonic waves such as HSM. AF will not function if the camera body does not support this type of motor. [. . . ]