User manual SILVERCREST KH 2351 RETRO RADIO

[. . . ] Ensure that neither the device nor the mains adapter could become wet or damp or sustain any other damage during use. Notice regarding power disconnection To completely separate the device from mains power, the mains adapter must be unplugged from the wall socket. For this reason, the device should be placed at a location where unobstructed access to the power socket is assured at all times, so that you are able to immediately remove the plug in the event of an emergency. To eliminate the risk of fire, prevent unintended activation and save energy costs, the mains adapter should be unplugged from the wall socket when the device is not in use. [. . . ] Never open batteries, never solder or weld batteries. If you do not intend to use the device for an extended period, remove the batteries. ⷠIn the event of the batteries leaking acids, wear protective gloves when removing the batteries. Then clean the battery compartment and the battery contacts with a dry cloth. Do not operate the device if it has sustained a fall or is damaged in any way. This device is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiencies in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the device is to be used. Children should be supervised to ensure that they do not play with the device. Do not leave packaging material lying unattended. plastic foils and bags and pieces of styropor etc. Are not toys, they can be dangerous for small children. Q w e r t y u i o a s d f g Telescopic aerial Carrying handle TUNING - transmitter calibration Station dial Loudspeaker DC 6V - Connection for the mains adapter Headphone output OFF/VOLUME - On/Off switch, sound volume regulator FM - Frequency selector button - VHF MW - Frequency selector button - MW LW - Frequency selector button - LW SW - Frequency selector button - KW Mains adapter Battery compartment cover Taking the device into use > First take all device components from the packaging and remove all packing foil and tape. Connecting the mains adapter > Insert the plug of the mains adapter f into the connection for the power supply voltage y on the device. > Then insert the plug of the mains adapter f into a correctly installed mains power wall socket supplying 230 V ~/50 Hz. Battery operation As an alternative to operation with the mains adapter f, the device can also be operated with batteries (batteries not supplied). > Pay heed to the correct poling of the batteries, otherwise the device will not function and could even be damaged. If you do not intend to use the device for an extended period, remove the batteries. > To switch the device on, turn the On/Off switch - sound volume regulator i clockwise over a small resistance. > Press the respective button > FM = Very high frequency o , > MW = Medium wave a , > LW = Long wave s , or > SW = Short wave d , > to select the desired frequency range . > For VHF reception, extend the telescope aerial q to its full length and then determine its best positioning. > For reception of the remaining frequency ranges , the radio is fitted with a built-in aerial. To improve reception, if necessary turn the radio until it is in the most favourable position. > Select the desired sound volume using the sound volume regulator i. [. . . ] In the event that the processing of your complaint is not possible by telephone, you will receive · A processing number (RMA number) as well as · An address to which you can send your device for repair under warranty. in the case of a mail-in shipment please enclose a copy of the purchase receipt (sales slip). The device must be securely packed and the RMA number clearly visible. Products sent in without the RMA number cannot be processed. [. . . ]