User manual SILVERCREST KH 2396 UNDER-CABINET RADIO

[. . . ] Intended Use Items supplied Technical data Safety instructions The appliance components Setting up the appliance Fixing the kitchen radio beneath a wall cabinet Setting up the kitchen radio The settings menu Radio operation Non-functionality Cleaning Disposal CE Conformity Importer Warranty and Service Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass this booklet on to whoever might acquire the appliance at a future date. This Kitchen Radio is intended for use either free-standing or for assembly beneath a wall cabinet. The kitchen radio is intended exclusively for the reception of FM radio stations as well as for alarm wake up by signal tone or radio. [. . . ] Otherwise the speakers are covered and the sound is scarcely audible. To fit the kitchen radio with the supplied mounting plate q: 1. Simultaneously press the two retaining levers on the back of the appliance down. Push the mounting plate q back and remove it. Push the two retainer lugs on the mounting plate q into the recesses on the lower rear side of the kitchen radio. Firmly press the front part of the mounting plate q down until you hear it engage. Insert the plug into a mains power socket. The display r is illuminated, the time begins to run but the radio is switched off (Automatic mode). Setting the time The radio must be off to set the time. Press and hold the keys to change the time in quick succession. Press the button MODE/BASS g again to save the time of day and move to the date settings. If, during the settings, you do not press a button within 15 seconds the device saves the setting and returns to the automatic mode. Press and hold the keys to change the date in quick succession. Press the button MODE/BASS g again to save the date and to move to the display brightness setting. In the display r appears "L" (low) and shows the lowest of the two brightness levels. Press the button DOWN y to switch back to the lower brightness level. Press the button MODE/BASS g again to save the display brightness setting and to move to the remind function settings. Setting the remind function You can programme a date, which the device will remind you of when it arrives. The display r shows, alternatively, a date and the SDA indicator for the remind date. Press and hold the keys to change the date in quick succession. /SNOOZE button s the date is deactivated and thus will remind you of this date every year. To deactivate the remind function, programme a date that lies in the past. [. . . ] Every consumer is statutorily obliged to dispose of batteries/rechargeable batteries to a community collection centre in their district or to a dealer. The purpose of this obligation is to ensure that batteries are disposed of in a non-polluting manner. Only dispose of batteries when they are fully discharged. This device complies, regarding conformity, to the basic requirements and other relevent provisions of the Low Voltage Directive 2004/108/EC, the Directive for Low Voltage Appliances 2006/95/EC and the Eco Design Directive 2009/125/EC (Ordinance 1275/2008 Appendix II, Number 1). [. . . ]