User manual SILVERCREST KH 1281

[. . . ] · Never bend (kink) or crush the power cord. Arrange it in such a way that it can not come into contact with hot surfaces and such that no-one can step on it or trip over it. · Always remove the power plug from the power socket after every use and when cleaning or filling. · Always unroll the power cord fully before switching on and do not use an extension cord. [. . . ] To avoid any danger of suffocation, keep this bag away from babies and children. · Plug the power plug into a power socket of 230 V~/50 Hz. · Hold the steam iron horizontally. · Set the temperature control a to the position "MAX". · Heat the steam iron for several minutes on the highest setting. Plugging In and Ironing Dry ironing without steam is possible at all temperatures, steam ironing is only possible from setting 2 (··). · Plug the power plug into a power socket of 230 V~/50 Hz. -3- Important! Should the care instructions for an article of clothing not mention ironing, (Symbol ), you should not iron that clothing article. You could otherwise cause damage to the clothing article. · Check the care instructions on the labels of the clothing article whether and at which temperature the clothing article may be ironed. · Set the appropriate temperature setting with the temperature control a. The control light for the temperature w lights up. When the control light goes out, the chosen temperature w has been reached. · Wait until the temperature control light w goes out. · To moisten the material, press the button for the water fog o. This function is suitable for very dry, crumpled or creased materials. Setting the Steam Iron Temporarily Aside Fire Hazard! Never leave the steam iron unattended when it is hot or switched on. · Set the temperature control a to the position "MIN". · Only put the steam iron down on its standing foot e, fig. 2. Putting the Steam Iron Away After Use · Remove the power plug from the power socket. · Empty the water reservoir and clean the gliding sole r. · Place the cool steam iron horizontally on a soft, clean base. Steam Ironing · Set the steam control u to the desired steam strength setting. Drip-Stop Function In conventional steam irons, it is possible that at too low ironing temperature water begins to trickle from the gilding sole r. However, this iron possesses a new technical feature, namely the DRIP-STOP function, to switch off steam. The iron automatically switches off the steam ejection at low temperatures. A "CLICK" noise is heard when this happens. [. . . ] Mobile operators may vary. e-mail: support. ie@kompernass. com Warranty & Service The warranty for this appliance is for 3 years from the date of purchase. This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase date. Should a claim need to be made under the warranty, please make contact by telephone with our service department. [. . . ]