User manual SILVERCREST KH 1560

[. . . ] 6 Steamer KH 1560 Steamer Operating instructions KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www. kompernass. com ID-Nr. : KH1560-10/09-V3 KH 1560 1 2 3 4 5 6 A 7 20 21 22 8 9 19 18 17 16 10 11 12 14 15 13 B Table of Contents Introduction Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Scope of Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Description of Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] j The LCD-display 13 will now show the current clock time (clock time mode). Q j Using Immediate-Start Function note: Consider that the base of the appliance / water tank 10 has to be filled with water at least up to the MIN mark 9 . Ensure that the turbo ring 8 in addition to the condensate collection basin 7 has been correctly positioned. j Press the ON / OFF button 14. The LCD display 13 will show the factory-set steaming time of 45 minutes (see fig. P ress the PLUS / MINUS button 16 to increase the steaming time in 5-minute steps or decrease it in 1-minute steps. note: The maximum steaming time is 90 minutes. note: Be aware that you might have to replenish water when the steaming time is longer. Use the openings on the sides of the condensate collection basin 7 for refilling. If the base of the appliance / water tank 10 is filled up to the MAX mark 19, it will be sufficient for approx. Ensure that the turbo ring 8 as well as the condensate collection basin 7 are positioned correctly. In the LCD-display 13, the time indicator 20 as well as the PROG symbol 21 (see fig. j ress the PLUS / MINUS button 16, to increase P the delay time in 10-minute steps or decrease it in 1-minute steps to achieve the desired delay. note: The set delay time refers to the current clock time. That means if you set a delay time of 30 minutes at 13:00, the steaming process will start at 13:30. j ress the PLUS / MINUS button 16 to increase P the steaming time in 5-minute steps or decrease it in 1-minute steps. note: The maximum steaming time is 90 minutes. note: Be aware that you might have to replenish water when the steaming time is longer. Use the openings on the sides of the condensate collection basin 7 for refilling. If the base of the appliance / water tank 10 is filled up to the MAX mark 19, it will be sufficient for approx. 1 hour of steaming. GB/IE/CY Press the PROG button 17 again. In the LCDdisplay 13 the time indicator 20 as well as the PROG symbol 21 will appear. j If the set delay time is elapsed, a signal tone will sound, the pilot lamp 15 will glow red and the appliance will start the steaming process automatically. a The appliance will become hot during use. [. . . ] j Then rinse and dry the appliance thoroughly. Descale the base of the appliance / water tank: j Place the turbo ring 8 with the upside down on the heating element 11 (larger side faces upwards). j Fill the base of the appliance / water tank 10 with cold water up to the MAX mark 19. j Fill the inside of the turbo ring 8 with usual decalcifier. [. . . ]