User manual SILVERCREST KH 1907

[. . . ] Lay the power cable in such a way that no one can tread on or trip over it. Never open the lid of the coffee machine during the brewing process. Remove the filter bag first when the coffee has drained away and it has cooled down. Do not hold your hands in the rising steam. [. . . ] Open the lid 1 and insert a filter bag (Size 1x4) with folded over sides into the filter holder 2. Using the measuring spoon w place coffee powder into the filter bag. Subject to taste, you will require approx one level measuring spoon w of coffee powder per cup. A level measuring spoon w approximates to about 6 gr of coffee powder. Fill the water tank 3 with the required amount of water. Never fill the appliance with water beyond the max-marking (12 cups). By use of the button PROG 6 you can programme the coffee machine so that it starts the brewing process at a pre-determined time. First, ALWAYS place coffee powder in the filter bag in the filter holder 2 and water into the water tank 3. place the glass carafe q in the coffee machine. Ensure that the water tank 3 is not filled beyond the Max. The coffee machine starts the brewing process at the programmed time. If you wish to deactivate the Timer, press the button ON/AUTO/OFF 7 again so that the integrated blue indicator lamp glows constantly. If you do not intend to use the coffee machine for an extended period, stow the power cable in the cable shaft at the rear of the coffee machine and insert the power plug into the designated holes on the cable shaft. Remove scale from the coffee machine at regular intervals. The required descaling intervals can, subject to water hardness, be very variable. Scale removal is already necessary after ca. 30 brewing processes with hard water, after ca. Your local water supplier will inform you about the water hardness level in your locality. Use only scale removal products that are suitable for coffee makers and pay heed to the instructions for use. 2 cups has passed through and then stop the brewing process by pressing twice on the button ON/AUTO/OFF 7. The integrated blue indicator lamp glows constantly and goes out after approx. Then restart the brewing process and wait until all of the solution has passed through. [. . . ] The warranty covers only claims for material and maufacturing defects, not for transport damages, worn parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. If this product has been subjected to improper or inappropriate handling, abuse, or modifications not carried out by one of our authorised service centres, the warranty will be considered void. This warranty does not affect your statutory rights. [. . . ]