User manual SILVERCREST SBTF 10 B2

[. . . ] ⷠInstall the hands-free appliance in the vehicle such that your view is not obstructed and that the appliance is not located in an impact zone in the passenger compartment or in the inflation area of airbags. Should you do so, appliance safety can no longer be assured and the warranty becomes void. Do not allow children and people subject to supervision play with the appliance, they could injure themselves or cause damage to the appliance. If you wish to connect the appliance to another appliance, read the operating instructions to obtain detailed safety instructions. [. . . ] A long, low signal tone will be heard and the LED status display 6 extinguishes. ⷠPosition the hands-free appliance and the mobile telephone so that they are not more than 1 metre away from each other. ⷠPress and hold down the multi-function button 7 for 6 seconds until, after 3 seconds a short, high signal tone and after a further 3 seconds a succession of low and high signal tones are heard. The LED status display 6 lights up constantly and the hands-free equipment is now in the coupling mode. Enter in the pre-programmed passcode "9999" and then confirm it, which couples the appliances with each other. You will hear a long high signal tone and the LED status indicator 6 blinks every 3 seconds. ⷠYou can now use the hands-free appliance. When using the latest mobile phones, (Smartphones) those that are equipped with Bluetooth 2. 0 or a more modern version, it is possible that the pass code "9999" need not be entered. If the coupling is not completed within 2 minutes, the hands-free appliance switches itself off. The LED status display 6 extinguishes and you will hear a long and deep signal tone. With some mobile telephones it is possible that coupling does not automatically take place. In this case coupling must be carried out additionally on the mobile telephone. The LED status display 6 blinks twice every 3 seconds until this has been carried out. Further information can be found in your mobile telephone's operating instructions. You can couple the hands-free appliance with up to eight mobile telephones. However, it can only be connected with one mobiletelephone. If a further mobile telephone is coupled with the hands-free appliance, the coupling information of the first coupled mobile telephone is erased. When the hands-free appliance is switched on, within a few seconds it attempts to make a connection to the last used mobile phone. Should a connection not be possible, the hands-free appliance nonetheless remains recognisable for other mobile telephones. To use the hands-free appliance with a linked mobile phone that is not the last used mobile phone, the connection must be made via the Bluetooth® menu of the mobile phone. If you wish separate the mobile telephone from the hands-free appliance, for example, to connect it to another Bluetooth® appliance: · You need not erase the coupling with the hands-free appliance in the Bluetooth® menu to separate the connection. [. . . ] Dispose of the appliance through an approved dis-posal centre or at your community waste facility. observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre. The warranty for this appliance is for 3 years from the date of purchase. [. . . ]