User manual SILVERCREST SDRB 1000 A1

[. . . ] Arrange for it to be repaired by qualified specialists. · Use only the ironing temperatures given in the care instructions for the material, or those suitable for it. Otherwise, you could damage the textiles. Should care instructions not be given or known, start with the lowest temperature setting. Risk of electrical shocks. · The rating of the local power supply must tally completely with the details given on the rating plate of the appliance. · To avoid possible dangers, arrange for a defective appliance to be checked and possibly repaired by qualified technicians, or contact our Customer Service Department. [. . . ] If you do so, the clothing item could be permanently damaged. · Do NOT use the appliance on leather, velvet, impregnated furniture or steam sensitive materials. If you do, the material/furniture could become damaged. Attention! Before refilling with water, ALWAYS remove the plug 7 from the mains power socket!· Lift the water tank 1 up vertically, in that you slide the release 4 for the water tank 1 to the rear until the water tank 1 allows itself to be lifted off. Grasp the water tank 1 with your thumb and index finger on the hatched markings to lift it vertically upwards. The temperature controller 3 remains on the appliance and is not lifted off. · Open the water fill opening 2 to the water tank 1. · Using the measuring beaker t, fill the water tank 1 with mains water to the "Max" marking, but no further. -4- Filling with water Attention! NEVER fill the water tank 1 with chemical substances, cleaning agents or fluids other than mains water (or a mix of mains and distilled water). · Close the water fill opening 2 to the water tank 1. Ensure that the lug on the water fill opening 2 sits in the indentation on the lid. Only in this way is the water tank 1 properly closed. · Replace the water tank 1 back onto the appliance. The water tank 1 must audibly engage with the unlocking device for the water tank 4. · By pressing the steam blast button 8 you can now produce jets of steam. The appliance is now ready for use. Notice: To release the first steam blast after heating the appliance up, it can happen that you may need to press the steam blast button 8 several times in succession. Attaching/detaching the brush attachment Attention!Attention! NEVER attempt to attach or detach the brush attachment w when the appliance is heated up. · To use the steam and brush function, place the brush attachment w onto the steam brush. · To do this, slide the brush attachment w all the way along the guide to the end. The unlocking device of the brush attachment q must engage audibly. · To be able to use the ironing function, remove the brush attachment w from the steam brush. · To do this, press the unlocking device q downwards and, at the same time, pull the brush attachment w away to the front. The steam brush can be used with all clothing items. Caution is to be exercised with heat-sensitive materials such as synthetics, polyamides or artificial silk. With these materials you should first check at a concealed part (inside seam) that the hot steam will not cause any damage to the garment. [. . . ] Mobile operators may vary. e-mail: support. ie@kompernass. com Warranty & Service The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. [. . . ]