User manual SILVERCREST SEK 400 A1

[. . . ] Do not use the egg cooker if it is located on a wet surface or if your hands or the appliance are wet. Position the power cord so that it does not come into contact with hot or sharp-edged objects. Do not kink or crush the power cord and do not wind it around the appliance. [. . . ] Only use the accessories included and never use the appliance without the egg holder w in place. Let the appliance and the accessory parts cool down completely before cleaning and storing them. Depending on the size of the egg, to obtain the desired hardness you may need to vary the volume of water used from that detailed by the scale markings on the measuring cup y. If the egg is too soft, use a little more water (about one mark on the measuring scale). If the egg is too hard, use a little less water the next time (about one mark on the measuring scale). Á Press the operating switch r to the left (position " ") to turn the appliance on for cooking. As soon as the eggs are cooked, a signal sounds. Push the operating switch back to the position "O" to turn the appliance off. Á After cooking, peel the eggs under cold, flowing water. Cleaning the appliance: Á Pull the power plug out from the power socket. Á Then clean the cooking bowl e and the power cord with a slightly damp cloth. Á Always dry the appliance well before using it again. Cleaning the accessories: Á Wash the lid q, the egg holder w and the measuring cup y with soap under flowing water. The egg holder w, lid q and measuring cup y can be cleaned in a dishwasher. Use the keep-warm function only for hard boiled eggs. After boiling, rinse the eggs under cold flowing water. [. . . ] The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. [. . . ]