User manual SILVERCREST SHRT 1500 A1

[. . . ] Should liquids enter the housing, unplug the appliance from the power socket immediately and have it repaired by a qualified technician. As additional protection we recommend the installation of a residualcurrent-operated protective appliance with a rated tripping current of not more than 30 mA in the bathroom circuit. In the event of operating malfunctions and before cleaning the appliance, remove the plug from the wall socket. To disconnect, always pull the plug from the power socket, do not pull the power cable. [. . . ] This travel hair dryer is fitted with an ion function. This is activated automatically when you switch it on. When drying hair using a "normal" hair dryer, the hair tends to charge itself with static and then begins to "fly". the ionic function generates negatively charged ions. These are brought to the hair by the air flow. thereby , the positive static charge in the hair is neutralised and voided. The hair will be soft, supple, shiny and easier to style. Fold the travel hair dryer q open until the grip e audibly locks in. Always set the voltage selector on the hairdryer q to the rating of the local electrical power supply, if you do not, the appliance could be damaged. Adjust the voltage selector t with a coin, until a click is heard. Make enquiries about the rating of the local electrical mains supply with the energy supplier or with the hotel personnel. Insert the power plug into a wall power socket. Fit the styling nozzle i onto the front of the travel hair dryer q: Ensure that the plastic latches on the styling nozzle i grip into the guides on the travel hair dryer q. Turn the styling nozzle i until it engages and sits firmly. Turn the styling nozzle i in the other direction and remove it by pulling it to the front if you wish to use a broader stream of air. Switch the travel hair dryer q on with the operating switch r. The travel hair dryer q is fitted with a three-position switch: "0" (Off), "I" (gentle airflow, warm) and "II" (strong airflow, hot). In the event of overheating, the travel hair dryer q automatically switches itself off. For quick-drying of the hair, we recommend a short time at switch position "II", and afterwards switch to position "I" for forming and styling. If you wish to create a cold air stream, press and hold the button "COOL" u. With the supplied styling nozzle i you can accurately direct the air flow for styling. If you wish to dry your hair especially gently, or with so-called "air-dried permanent waves", use the finger diffusor o. [. . . ] The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. [. . . ]