User manual SILVERCREST SHTD 2200 A1

[. . . ] Do not pinch or squeeze the power cable and lay it in such a way that no one can tread on or trip over it. Never touch or handle the Professional Hair Dryer, the power cale or plug with wet hands. Immediately separate the Professional Hair Dryer from the power source after use. The appliance is completely free of electrical power only when you unplug it . [. . . ] Never place the Professional Hair Dryer close to sources of heat and protect the power cable against potential damage. Should the Professional Hair Dryer be dropped or otherwise sustain damage, it may no longer be used. Arrange for the appliance to be checked and, if necessary, repaired by qualified technicians. Do not cover the ventilation grill when using the appliance. Hold it only by the grip when it is hot. The Professional Hair Dryer is intended only for the drying and shaping of human hair, under no circumstances is it to be used for wigs and hairpieces made of synthetic material. You may use it exclusively in domestic households. Pay heed to all of the information in this operating manual, especially the safety instructions. This appliance is not designed for use in commercial or industrial applications. The hair dryer is fitted with two function switches. With these you can separately select the strength of the air flow (Blower switch t) and the level of heat (Heat level switch y): Blower levels 0/ The hair dryer is switched off 1/ reduced air flow 2/ full power air flow Heat levels 1/ Cold air flow 2/ Low heating level 3/ High heating level Insert the plug into a wall socket. Cleaning the housing To clean the housing, use a soft cloth moistened with a mild soapy solution. Clean the air suction grill w at regular intervals with a soft brush. Do not dispose of the appliance in your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC. Dispose of the appliance through an approved disposal centre or at your community waste facility. observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre. Clean the openings of the air suction grill w with a soft brush. Replace the air suction grill w back onto the hairdryer so that the arrow on the air suction grill w points to the bottom arrow on the hairdryer. Turn the air suction grill w clockwise until the arrow on the air suction grill w points to the upper arrow on the hairdryer. Should your Professional Hair Dryer not function as expected, first remove the plug from the wall socket and allow the appliance to cool down for a few minutes. [. . . ] The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured. [. . . ]