User manual SILVERCREST SIM 13 A1

[. . . ] Do not hold or carry the appliance with the power cable. · Do not fold or crush the power cable. Ensure that the power cable does not run over sharp edges. [. . . ] With vibration switched on in the massage head 1, a relaxing and pain relieving effect can be achieved for tired muscles through gentle massage. The grip 7 can be turned in five levels over a radius of 90°. · For this, press the locking button on the swing arm 8 down and move the grip 7. · Release the locking button 8 and turn the grip 7 until it engages. Equipping the massage head with accessories Select, according to the application requirement, an accessory (0, q, w, e, r, t) for the massage: The roller accessory 0: Stimulates the blood circulation. Guide the roller accessory back and forth over the whole of the body. The nub accessory q: The 21 nubs are suitable for deep massage and large muscle groups. The surface accessory w: Use this accessory on the whole body to relieve muscle pain and tensions. The Shiatsu accessory e: The Shiatsu accessory simulates the finger posture of a masseur and is suitable for deep massage. The knead-massage accessory r: This accessory is suitable for kneading simulation and deep massage. The accessory for exacting massage t: Use this accessory for the massage of individual muscle groups. Release a possibly fitted accessory from the massage head 1, in that you hold the grip cavity 2 and pull it off. Place the accessory (0, q, w, e, r, t) of your choice on the massage head 1 and pay attention that the round curbs of the massage head 1 and the accessory (0, q, w, e, r, t) lie one on top of the other. Push the accessory (0, q, w, e, r, t) onto the massage head then check to make sure that it is firmly fixed. Taking into use Unpacking · Take the Infra Red Massage Appliance and the accessories from the packaging. · Remove all packaging material. Attention: Do not permit small children to play with plastic packaging. There is a risk of suffocation! Adjusting the rotatable parts of the massage appliance · With the revolvable ring 3 the massage head 1 can be turned through a radius of 270°. Thus either the infra red lamp 9 or the massage head 1 is directed at the body part to be treated. -4- Usage · Insert the power plug into a wall power socket. · Always start the massage at the position furthest from the heart and then slowly work towards the heart. Switching on · To switch on the Infra red lamp slide the switch INFRARED 4 into the position "I". · Slide the switch MASSAGE 5 into the position "I" for normal vibration. · For a stronger vibration slide the switch MASSAGE 5 into the position "II". Ending usage Switching off · After use, dependant on the application, return the switches INFRARED 4 and MASSAGE 5 back into the position "0". · Remove the plug from the wall power socket. WARNING! After use do not lay the Infra Red Massage Appliance down with the infra red lamp 9 facing downwards! [. . . ] In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and manufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. g. [. . . ]