User manual SILVERCREST SKATG 1050 A1 COFFEE MACHINE

[. . . ] Remove the filter bag when all of the coffee has drained away and the bag has cooled down somewhat. Do not hold your hands in the rising steam. Never move/transport the appliance during the brewing process. This symbol warns you about hot steam clouds. [. . . ] For this, use the glass jug l with the scale. When filling the appliance with water, never exceed the MAX marking in the water tank e. Note: After brewing, there is always somewhat less coffee in the glass jug l than the amount of water that you filled the water tank e with. The coffee powder absorbs some of the water. With this coffee maker you can fill a cup with coffee using only one hand: · When there is coffee in the glass jug l, press and hold your cup against the coffee button d. When the cup is full, remove the cup from the coffee button d. Any drips that might fall will be caught by the driptray grill f. Note: Regularly empty and clean the driptray under the driptray grill f. Note: If you pour coffee using the coffee button d, a small amount of coffee will always be left in the glass jug l. You can also pour coffee from the glass jug l in the usual manner: · Note: If, before you lift the glass jug l out, you have activated the coffee button d, it can happen that a few drops of coffee will drip from the glass jug l. Before cleaning, ALWAYS remove the plug from the wall power socket. By use of the button PROG a, you can programme the coffee maker so that it starts the brewing process at a pre-determined time (Timer function). First, always fill the filter q in the filter basket 1( with coffee powder and the water tank e with water. place the glass jug l in the coffee maker. Ensure that the glass jug l is empty and the water tank e is not filled beyond the Max marking. When the desired start time has been entered in, press the button PROG a once more. The coffee maker will now start the brewing process at the programmed time. Before you clean the Coffee Maker you MUST remove the plug from the power socket. Always wait until the coffee maker has cooled down before cleaning it. Clean the glass jug l, filter q and filter basket 1( in mild sudsy water and rinse them with lots of clean and clear water. Note: Clean the filter q as soon as possible after it has cooled. at a later time it will be more difficult to clean. [. . . ] The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. [. . . ]