User manual SILVERCREST SMZ 260 B1

[. . . ] Do not submerse the motor block of the universal food processor in liquids at any time and do not permit liquids to penetrate into the housing of the motor block. · NEVER subject the appliance to moisture and do not use it outdoors. If by chance liquids do enter into the housing, unplug the appliance from the power socket immediately and have it repaired by a qualified technician. · Never grasp the universal food processor, the power cable or the plug with wet hands. · Should the power cable or motor block become damaged, arrange for the universal food processor to be repaired by a qualified specialist before using it again. [. . . ] With hard foodstuffs select a pulsating processing. For this, press the turbo button 1 repeatedly for a short time (in addition to the motor block 2). Should the foodstuff not be completely pulverised, you can either cut it into smaller pieces or lift the motor block 2 from the lid collar 3. Shake the bowl 6 vigorously and then continue with the processing. Filling Processing quantity time 130 g 3 x 5 secs. SPEED Turbo 100 g 4 x 15 secs. Turbo Onions Garlic Carrots Dried fruit 100 g 100 g pulsating 3 x 5 secs. Turbo Normal Turbo 130 g 4 x 15 secs. pulsating When the contents have been sufficiently chopped, Turbo release the motor block 2 and, if necessary, the turbo button 1. Unplug the power cable from the socket. Almonds Eggs (hard boiled) Turbo Turbo Turbo Walnuts Ice cubes -4- Risk of personal injury! Never attempt to remove food from the bowl 6 when the blade 7 is still in motion. Contents could shoot out and make a mess. Beating cream Using the whisk attachment 0, you can also whip cream with this appliance: Wait until the blade 7 has stopped rotating. Lift the motor block 2 from the lid collar 3. Remove the lid 4. Risk of personal injury! To avoid injuries, exercise caution when handling the extremely sharp blade 7. Keep the blade 7 out of the reach of children. Place the bowl 6 in the appliance base 9. Place the blade holder 5 with the knife 7 on Push the whisk attachment 0 onto the blade holder 5: For 100ml of cream, place it on the blade holder so that the whisk attachment 0 rests on the two blades and engages. For 200ml of cream, turn the whisk attachment 0 vertically through 180°, so that it rests on only one blade and engages. It then ploughs higher through the cream: the mounting 8. Carefully pull the blade holder 5 with the knife Remove the contents. Note Due to the grinding of hard and abrasive foodstuffs, the bowl 6 can take on a dull appearance over time. This is normal and does not influence the functioning of the appliance. 7 out of the bowl 6. Tip After you have finished processing the foodstuffs, you can use the appliance base o as a cover for the bowl y, this will help to keep the foodstuff fresh for longer. Remove the motor block 2 and the lid 4 from the bowl y. The blade retainer 5 with the blade 7 can, if you wish, remain in the bowl y. Loosen the appliance base o from the underside of the bowl y. You can now place appliance base o on the bowl y so that it seals the bowl y. Pour the cream in. Close the bowl 6 with the lid 4: Place it on the bowl 6 so that the lugs on the lid 4 engage in the slots on the bowl 6. Then turn the lid 4 so that the lugs slide unter the slots and the lid 4 locks into place. Place the motor block 2 on the lid collar 3. [. . . ] In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and manufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. g. This product is for private use only and is not intended for commercial use. [. . . ]