User manual SILVERCREST SMZ 260 C2

[. . . ] Never grasp the universal food processor, the power cable or the plug with wet hands. Should the power cable or motor block become damaged, arrange for the universal food processor to be repaired by a qualified specialist before using it again. Do not open the motor block housing of the universal food processor. Should you do so, appliance safety can no longer be assured and the warranty becomes void. [. . . ] with hard foodstuffs select a pulsating processing. For this, press the turbo button 1 repeatedly for a short time (in addition to the motor block 2). Should the foodstuff not be completely pulverised, you can either cut it into smaller pieces or lift the motor block 2 from the lid collar 3. Shake the bowl 6 vigorously and then continue with the processing. ³ When the contents have been sufficiently chopTurbo ped, release the motor block 2 and, if necessary, the turbo button 1. ³ Unplug the power cable from the socket. Never attempt to remove food from the bowl 6 when the blade 7 is still in motion. Contents could shoot out and make a mess. Using the whisk attachment 0, you can also whip cream with this appliance: ³ Wait until the blade 7 has stopped rotating. ³ Lift the motor block 2 from the lid collar 3. Keep the blade 7 out of the reach of children. ³ Place the blade holder 5 with the knife 7 on ³ Push the whisk attachment 0 onto the blade holder 5: For 100 ml of cream, place it on the blade holder so that the whisk attachment 0 rests on the two blades and engages. For 200 ml of cream, turn the whisk attachment 0 vertically through 180°, so that it rests on only one blade and engages. It then ploughs higher through the cream: the mounting 8. ³ Carefully pull the blade holder 5 with the knife ³ Remove the contents. This is normal and does not influence the functioning of the appliance. After you have finished processing the foodstuffs, you can use the appliance base o as a cover for the bowl y, this will help to keep the foodstuff fresh for longer. ³ Remove the motor block 2 and the lid 4 from the bowl y. The blade retainer 5 with the blade 7 can, if you wish, remain in the bowl y. Loosen the appliance base o from the underside of the bowl y. You can now place appliance base o on the bowl y so that it seals the bowl y. Then turn the lid 4 so that the lugs slide unter the slots and the lid 4 locks into place. [. . . ] The warranty covers only claims for material and manufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. [. . . ]