User manual SILVERCREST SPU 900 A1

[. . . ] Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass this booklet on to whoever might acquire the appliance at a future date. All rights including those of photographic reproduction, duplication and distribution by means of particular methods (for example data processing, data carriers and data networks), wholly or partially as well as substantive and technical changes are reserved. Warning A warning of this danger level signifies a possible dangerous situation. [. . . ] -1 OFFSET In your time zone (local -1 city) it is summer time and in the adjusted world time it is currently winter time resp. Programme the reminder function You can programme in up to 10 dates on which the appliance can give you a reminder when they arrive. Press the buttons DOWN/UP i/o to programme in the first desired memory date. Pressing and holding one of the buttons changes the indicator faster. If you press the SNOOZE/DIMMER button y, the year number will be deactivated and you will thus receive a reminder on this date every year. Should you wish to programme in further dates, press the PAGE/AL. SET button f to select a memory slot from 2-10. To deactivate the memory function, programme in a date that lies in the past. Programme the Update function With this function the appliance can automatically up-date the time by using RDS-Data. Press the DOWN/UP i/o button to set the desired time frame for the sleep function between 1 and 59 minutes. Press the button UP o to return to the 24 hour modus. When set to "OFF" the projection lights up permanently and can be switched on or off by pressing the PROJECTION button a. The display g shows "DT 23:00 ON" as the time at which the display is to be The display g shows "DT 6:00 OFF" as the time at which the display is to return to its normal brightness. Press the MODE/LOCK button eonce again to close adjustment. Using the buttons DOWN/UP i/o set the desired time interval (a time span between 1 minute and 23:59 h is possible). Should the time be expired, the timer signal will sound for about 10 minutes, the NAP indicator flashes and the time is displayed. If you wish to end the Timer function before the alarm, press and hold the button NAP/USER k for one second. Alarm function (Alarm 1 to 4) You can programme in up to four alarm times on your radio alarm. If a button is not pressed within approx. 15 seconds, the appliance saves the adjustment and then leaves the programming mode. With the radio switched off, press the PAGE/AL. sET button f to call up the alarm function. [. . . ] Batteries/rechargeable batteries can contain toxic substances which may damage the environment. Therefore, dispose of the batteries/rechargeable batteries in accordance with statutory regulations. Every consumer is legally obliged to surrender batteries/rechargeable batteries to a community collection centre in their district or to a dealer. If necessary, firmly position it with adhesive tape. [. . . ]