User manual SILVERCREST SSTS 1500 A1 CAMERA TRIPOD

[. . . ] This tripod is designed for attaching video and photo cameras or other devices with a matching thread. This tripod is intended only for private use and not for commercial applications. [. . . ] Note: You can adapt the tripod legs 6 to uneven ground by bending them. It is also possible to position the tripod using the flexible tripod legs 6 for example, on railings or similar. However, always ensure that the tripod with the mounted device is standing safely and securely. Note: This tripod is equipped with a quick release plate 2. When a device is screwed onto the quick release plate 2 you can, by pressing the four locking pins 4 on the sides of the tripod plate 3, release the device together with the quick release plate 2 from the tripod plate 3. Thus, you do not always have to unscrew the device from the thread 1. To replace the quick release plate 2 complete with the device back on the tripod plate 3, press the locking pins 4 and reposition the quick release plate 2. Then release the locking pins 4, so that the quick release plate 2 is firmly seated. Clean the tripod with a lightly moistened cloth. Loading: 1500 g (with tripod legs extended) Length: 27 cm (with tripod legs planted/extended) Thread: 1/4 inch Weight : 155 g In case of doubt, please contact your waste disposal centre. Read these operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass this booklet on to whoever might acquire the appliance at a future date. [. . . ] The affixed devices as well as the tripod could be damaged. â· Screw the device onto the quick release plate 2 so that it is firmly seated. [. . . ]