User manual SILVERCREST SWKD 3000 A1 KETTLE

[. . . ] After use, ALWAYS remove the plug from the mains power socket. Simply switching off is not sufficient, because the appliance remains "live" for as long as the plug is inserted in the mains power socket. Heat water only with the lid closed, otherwise the automatic switch-off cannot function. Boiling water could then be sprayed out over the edge. [. . . ] Insert the plug into a mains power socket. If you want to bring water to a boil (100°C), you only need to press the On/Off button e. - You can cancel the heating up of the water at any time by pressing the On/Off button e. - Once you lift the kettle from the base y, the appliance switches all functions off. Do not let the water stand in the kettle for longer than is absolutely necessary. Pour away the water that is no longer required immediately. The keep-warm setting can be made before, during or immediately after the boiling process: Before the boiling process og c · The water will now also be kept warm after being heated. The water will now also be kept warm after being heated. The appliance will then automatically maintain the keep-warm temperature at the temperature you selected to heat the water. the LED q of the currently set temperature glows , the LED integrated in the KEEP WARM w button glows as well as the LED in the On/Off e button. With this kettle you can maintain the water at a temperature of (about) 40°C, 60°C, 80°C or 100°C for 30 minutes. Should you have set the desired temperature maintenance at 100°C, to avoid excessive steam development the kettle holds the water at a temperature of between about 90°C and 100°C. If the desired heating maintenance temperature is 80°C, 60°C or 40°C, the water heater holds the water at a temperature of between about 8°C above or below the selected temperature. Use the keep-warm function only when there is at least 0. If there is less water in it, the kettle may be switched off within the 30 minutes in order to protect the heating element. BEFORE you lift the kettle from the base y, first disconnect the plug from the mains power socket. This prevents causing a short circuit by water possibly spilling out of the kettle and falling onto the live electrical connections in the base y. For safety reasons, the lid should not be opened while the water is boiling or is very hot. There is a risk of receiving severe scalds. As soon as the water temperature falls below the set temperature, the kettle heats up again automatically. After 30 minutes the kettle switches itself off. - At any time you can cancel the temperature maintenance of the water by pressing the On/Off button e or the KEEP WARM button w. [. . . ] The warranty period is not extended by repairs effected under warranty. this applies also to replaced and repaired parts. Damages or defects discovered after purchase are to be reported directly after unpacking, at the latest two days after the purchase date. Repairs carried out after lapse of the warranty period are subject to charge. [. . . ]